Starrag Droop+Rein FOGS overhead gantry-type machine
F-35 Lightning produced by Lockheed Martin
Stealth and supersonic. These are two attributes of the most dominant and complex military combat fighter jet in the world, the F-35 Lightning produced by Lockheed Martin. "These words also describe the ultra-precise capabilities of Starrag's manufacturing machines, with more than 60 installations involved in the creation of each F-35 Lightning jet," said a company spokesperson.
The spokesperson continued, "It takes a single pilot to maneuver the $100 million jet, but it takes thousands of Joint Strike Fighter (JSF) partners to construct the F-35 Lightning to ensure that pilot has the most superior fighter apparatus in the world. Starrag is one of those partners."
"It is heart stopping when you attend an air show or are at a stadium when the U.S. military conducts a flyover with the F-35," said Starrag Chief Sales Officer (CSO) Alexander Attenberger. "We swell with pride knowing that Starrag plays a role in the JSF program, which is planned to continue for possibly another 50 years."
The Starrag machines produce a wide range of JSF specialized components using steel, aluminum and titanium.
Starrag's Storied History with the JSF
The first F-35 flight launched in 2006. Starrag's involvement with the program had begun in the early 2000s when it worked with a United Kingdom-based customer on titanium parts. Starrag previously had developed tailored machines for machining parts for other aircraft for this customer and other manufacturers.
"Starrag's extensive experience of machining titanium was extremely competitive, particularly in regard to tool costs, which are the largest ongoing life cycle costs of machining," said Starrag Managing Director Dr. Bernhard Bringmann. The joint work and developments soon evolved into Starrag's BTP (Big Titanium Profiler) machining center with pallet sizes of 16" x 6.5" (5,000 mm x 2,000 mm) to accommodate the machining of stringers. Today, 23 BTPs are in production factories in the UK and Australia.
With 737 ft. lb. (1,000 Nm) twin spindles and a tool magazine with more than 400 pockets, the BTP 5000/2 simultaneously mills titanium tail fin components of 27.6" to 31.5" (700 mm to 800 mm) width and just 2" (50 mm) thick to tolerances within 0.00118 (30 µm) and to surface finish qualities of Ra 1.6 (for 5-axis tasks) and Ra 0.8 (3-axis). To ensure those demands are consistently met, Starrag's turn-key solutions include the construction of a machine foundation of 6.5' (2 m) deep to ensure sufficient stability.
Even the earliest machines installed are continuing to hold the specified volumetric tolerances-in some cases, maintaining 50 microns across the machining envelope with ranges that extend to 15.7' x 9.8' x 5' (4,800 mm x 3,000 mm x 1,500 mm), according to the company.
"With our ongoing support, there is no reason why our JSF customers should not continue to maintain such high accuracies day in and day out for the next five decades," said Bringmann. "For every machine and flexible manufacturing system (FMS) we provide, we work very closely with the customer to provide the perfect machining solution to achieve the best quality and cost-effective end result."
Gantry-Type 6-Axis Machining Centers
The capabilities of the Droop+Rein FOGS overhead gantry-type 6-axis machining centers are used for JSF work, not only for high-speed finishing of dies, but especially for the fixed, fork-type heads with 221 ft. lb. (300 Nm) spindle. Starrag continuously developed its FOGS models to efficiently rough machining a range of steel and titanium F-35 components using a variety of heads.
Carbon fiber is another material in Starrag's machining portfolio. An FMS solution is based around FOGS machines and housed in a large, temperature-controlled building. The FMS accommodates certain panel configurations that need surface milling, routing and drilling in a single set-up before being cleaned and passed along to an integrated coordinate measuring machine (CMM). The workpieces sit in fixtures on the pallets that are moved under constant vacuum to the inspection machine.
In addition, the FMS features an enhanced control software, Starrag's kinematic management system that enables the FOGS machines to hold tolerances of 50 microns over their entire 15.7' x 9.8' x 5' (4,800 mm x 3,000 mm x 1,500 mm) working envelope while cutting in fully interpolative 5-axis mode. Initially established with five machines, the FMS now has nine machines served by a 90-pallet Fastems system.
Starrag's workable concept of the interchangeability of machined parts was also borne from the JSF program. With parts being manufactured from around the world, the JSF program required that all of them meet very stringent tolerance specifications for interchangeability in the jets. Starrag, which had similar accuracy specifications to meet the production of the Eurofighter Typhoon jet, was successfully able to meet those stringent interchangeability standards. Initially supplying a tailored horizontal machining center, Starrag added volumetric compensation routines to a standard FOGS model to complete these complex tasks.
"The combination of Starrag's expertise and the input of the customer's accumulation of knowledge from its business standpoint is what creates optimized production solutions. In addition to machine build quality, this ongoing quest also involves CNC software, fixtures and work holding, as well as tool design and development. Our solutions not only have to provide immediate results in terms of lowest cost per part at the expected quality level, but they also have to sustain over the lifecycle of the part. In JSF's case, this could mean a runway of another 50 years of flight," said Bringmann.
About the JSF program
The F-35 Lightning II is an American family of single-seat, single-engine, all-weather stealth multi-role combat aircraft. It is being manufactured in three main variants: the conventional take-off and landing F-35A; the short take-off and vertical landing F-35B; and the carrier-based F-35C. The aircraft descends from the Lockheed Martin X-35. Lockheed Martin is the prime contractor, with principal partners being Northrup Grumman and BAE Systems. The U.S., which is the primary customer and financial backer, plans to buy 2,456 F-35s through to 2044. The aircraft is projected to operate until 2070.
About Starrag Group
Starrag Group provides manufacturing high-precision machine tools for milling, turning, boring and grinding workpieces of metallic, composite and ceramic materials. Principle customers are internationally active companies in the aerospace, energy, transportation and industrial sectors. In addition to its portfolio of machine tools, Starrag Group provides integrated technology and maintenance services to enhance customer productivity.
The umbrella brand Starrag unites the product ranges Berthiez, Bumotec, Dörries, Droop+Rein, Ecospeed, Heckert, Scharmann, SIP, Starrag, TTL and WMW.
For more information contact:
Starrag USA Inc.
North American Headquarters
Skyport Business Park
2379 Progress Drive
Hebron, KY 41048
859-534-5201
ussales@starrag.com
www.starrag.com