Mazak has introduced the VORTEX HORIZONTAL PROFILER 160 XP HMC for fast, accurate processing of medium and large parts. With a 157.48" x 49.21" wide table that has a maximum loading weight of 6,614 lbs., this machine is suited for aircraft machining applications, especially structural components of wing systems such as wing ribs.
Featuring a 160-HP, 30,000-RPM HSK-A63 spindle with integral motor-spindle design, the VORTEX HORIZONTAL PROFILER 160 XP offers power and rigidity to cut a wide range of challenging materials with a standard 30-tool magazine for enhanced machine tool versatility.
The machine's 157" (4,000 mm) x 63" (1,600 mm) vertically oriented worktable accommodates workpieces up to 6,614 lbs. (3,000 kg). It also positions horizontally to facilitate part loading and set-up. An optional rotary-type, two-table changer further boosts productivity. Axis travels measure 165" in X, 59" in Y, and 22" in Z (4,191 mm x 1,499 mm x 559 mm) to accommodate a wide range of part sizes.
For full 5-axis capabilities, the machine's rotary/tilt spindle provides +/- 200° C-axis rotation and +/- 100° A-axis tilt. The 50-RPM direct-drive motors power both C and A axes.
Mazak integrated the VORTEX HORIZONTAL PROFILER 160 XP's machine base, column and table into a box-type design that enables consistent, highly rigid cutting performance. Rapid traverse rates enable high levels of productivity. An advanced coolant and chip disposal system evacuates chips efficiently and minimizes heat displacement for greater stability during cutting processes.
Every Mazak machine, including the VORTEX HORIZONTAL PROFILER 160 XP, is backed by Mazak MPower Complete Customer Care, a comprehensive machine support program. Plus, Mazak Capital Equipment Financing (MCEF) allows shops to easily move their manufacturing forward with one-stop, factory-direct financing on Mazak equipment.
For more information contact:
Mazak Corporation
P.O. Box 970
Florence, KY 41022-0970
859-342-1700
www.mazak.com
Southwest
Don Miller
Mazak SW Technology Center
10950 Greenbend Blvd.
Houston, TX 77667
281-931-7770
dmiller@mazakcorp.com
www.mazak.com
LA
Richard Cahn
Dixie Mill Machine Tools Co.
901 Tchoupitoulass Street
New Orleans, LA 70152
504-525-6101 / 888-462-9519
rcahn@dixiemill.com
www.dixiemill.com
OK, AR
Pioneer Machine Sales
4702 Mimosa Circle
Richmond, TX 77406
832-509-1089
Arkansas location: 479-401-2880
sales@pioneermachinesales.com
www.pioneermachinesales.com
N. TX
Don Miller
Mazak SW Technology Center
10950 Greenbend Blvd.
Houston, TX 77667
281-931-7770
dmiller@mazakcorp.com
www.mazak.com
W. TX
Chris Edgar
Magnum Precision Machines, Inc.
12025 Rojas Drive, Suite A
El Paso, TX 79936
915-856-7900
cedgar@magnumabq.com
www.magnumprecisionmachines.com
NM
Chris Edgar
Magnum Precision Machines, Inc.
8448 Washington Place NE
Albuquerque, NM 87113
505-345-8389
cedgar@magnumabq.com
www.magnumprecisionmachines.com
Southeast
Travis Kirby
Mazak Southeast Technology Center
1075 Northbrook Pkwy.
Suwanee, GA 30024
678-985-4800
tkirby@mazakcorp.com
www.mazak.com
NC, SC, VA
Crotts & Saunders, LLC
2709 Boulder Park Ct.
Winston-Salem, NC 27101
336-765-7250
cmiller@thehehgroup.com
www.thehehgroup.com/crotts-saunders/
TN
Terry Peer
Pinnacle Machine Tools, Inc.
5912 Toole Drive
Knoxville, TN 37919
865-951-0260
peer@pinnaclemachine.net
AL, FL Panhandle
Jerry Edwards
Pinnacle Machine Tool Inc.
141 Nick Fitcheard Road
Huntsville, AL 35806
256-852-0900
edwards@pinnaclemachine.net
GA
Tim Kramer
Premier Engineering Co.
1635 Lakes Pkwy. Ste. U
Lawrenceville, GA 30043-5858
678-442-8382
tim@premierengineering.com
www.premierengineering.com
MS
Richard Cahn
Dixie Mill Machine Tools Co.
901 Tchoupitoulass Street
New Orleans, LA 70152
504-525-6101
rcahn@dixiemill.com
www.dixiemill.com
FL
Tim Kramer
Premier Engineering Co.
6985 McCoy Road, Ste. 100
Orlando, FL 32822-4719
tim@premierengineering.com
www.premierengineering.com
Northeast
New England, E. NY, N. NJ
Stan Demke
Mazak Northeast Technology Center
700 Old County Cir.
Windsor Locks, CT 06096
800-436-8900 / 860-292-4400
sdemke@mazakcorp.com
www.mazak.com
MD, DE, PA, N. WV, S. NJ, W. NY
Bill Miller
A.W. Miller Technical Sales
7661 Seneca St. / P.O. Box 69
East Aurora, NY 14052
716-652-8286
Harmony, PA: 724-453-1691
Harleysville, PA: 215-256-8281
bmiller@awmiller.com
www.awmiller.com
S. WV
Crotts & Saunders, LLC
2709 Boulder Park Ct.
Winston-Salem, NC 27101
336-765-7250
cmiller@thehehgroup.com
www.thehehgroup.com/crotts-saunders
Midwest
Randy Ragnini
Mazak Midwest Technology Center
300 East Commerce Drive
Schaumburg, IL 60173
847-885-8311
rragnini@mazakcorp.com
www.mazak.com
ND, SD, MN, W. WI
Dayton Tvrdik
Tony Bailey
Northwest Machine Technologies, Inc.
20851 Commerce Blvd.
Rogers, MN 55374
763-493-3660
tbailey@nwmtec.com
www.nwmtec.com
NE, W. IA
Duane Ohlrich
Industrial Systems & Supply Inc.
2760 E. 29th Avenue
Columbus, NE 68601
402-564-4445
ohlrich@industrial-systems-supply.com
industrial-systems-supply.com
E. IA
Jeff Everett
Mazak Iowa Technology Center
609 Myatt Drive, Ste. 1
Maquoketa, IA 52060
563-652-6065
jeverett@mazakcorp.com
www.mazak.com
E. MO, S. IL
Nick Shelton
Municipal Machinery, A TSM Group
2465 Rock Island Blvd.
Maryland Heights, MO 63043
314-994-9905
nshelton@tsmachinegroup.com
www.municipalmach.com
S. MO, W. MO
Nick Shelton
Concept Machinery, A TSM Group
9900 North by Northeast Blvd.
Fishers, IN 46037
317-845-5588
nshelton@tsmachinegroup.com
www.conceptmachinery.com
E. WI
Mike Cekanor
Machinery Systems North
3280 Gateway Rd.
Brookfield, WI 53045
262-781-4850
mikec@machsys.com
www.machsys.com
N. IL, N.W. IN
Eric Hilliard
Machinery Systems Inc.
614 East State Parkway
Schaumburg, IL 60173
847-882-8085
erich@machysys.com
www.machsys.com
E. MI
Peter Addy
Addy Machinery Co.
36055 Groesbeck Highway
Clinton Township, MI 48035
586-741-3000 / 800-ADDY-NOW
peter@addymachinery.com
www.addymachinery.com
W. MI
Joe Addy
Addy Machinery Co.
3757 Broadmoor Ave. SE, Ste. A & B
Grand Rapids, MI 49512
800-AddyNOW
joe@addymachinery.com
www.addymachinery.com
S. OH
Greg Knox
Knox Manufacturing Solutions
375 Industrial Drive
Franklin, OH 45005
937-743-2641
gknox@knoxcnc.com
www.knoxcnc.com
IN, KY
Nick Shelton
Shelton Machinery, A TSM Group
9900 North by Northeast Blvd.
Fisher, IN 46037
317-845-5588
nshelton@tsmachinegroup.com
www.sheltonmachinery.com
N. OH
Motch & Eichele
318 Remington Road
Cuyahoga Falls, OH 44224
800-833-9730
jszymczyk@thehehgroup.com
www.thehehgroup.com/motch-eichele
West
WA, OR
Mark Harris
CNC Machine Services, Inc.
7808 184th St. SE
Snohomish, WA 98296
425-788-4500
sales@cncmachineservice.com
www.cncmachineservice.com
N. ID
Dave Fisher
Dependable Machine
88 W Orchard Ave.
Hayden, ID 83835
866-967-0146 / 208-714-4652
sales@dependablemachineryrepair.com
www.dmi-cnc.com
AZ, S. NV
Chris Edgar
Magnum Precision Machines
4848 S. 35th St.
Phoenix, AZ 85040
602-431-8300
cedgar@magnumabq.com
www.magnumprecisionmachines.com
CO, WY, UT, S. ID, MT
Jason Love
Mazak Mountain States Direct
47273 Fremont Blvd.
Fremont, CA 94538
833-508-6130
jlove@mazakcorp.com
www.mazak.com
S. CA
Tony Harrod
Mazak Western Technology Center
Aerospace Technology Center
1333 West 190th Street
Gardena, CA 90248
310-327-7172
tharrod@mazakcorp.com
www.mazak.com
N. CA
Nathanael Uyeyama
Mazak Northern California
Technical Center
47273 Fremont Blvd.
Fremont, CA 94538
nuyeyama@mazakcorp.com
www.mazak.com