Mazak's new TOOLTECH compact tool magazine stores big, heavy and large-diameter tools within a small amount of required floor space. "In addition, special tool carts and docking stations eliminate the need for operators to manually lift tools in and out of the system, so tooling set-ups are faster, easier and safer," said a company spokesperson.
TOOLTECH accommodates up to 206 tools in the same amount of space required for a 120-tool chain-type magazine storage system. This economical use of space results from the fact that TOOLTECH efficiently organizes tools according to their lengths and diameters and stores them in racks - one type designated for tools with diameters bigger than 100 mm, the other for diameters less than that size.
With its carts and docking station, TOOLTECH offers easy and safe handling of tools with diameters up to 360 mm, lengths to 800 mm and weights up to 40 kg. Operators roll one of TOOLTECH's tool carts to where the shop's tools are stored, place any needed tools onto the cart and push it directly into the storage system's magazine tool-docking station where the tools load into racks. A user-friendly touchscreen control panel provides operator convenience and intuitive system operation.
As a shop's tooling needs increase, TOOLTECH's storage capacity can expand - to as many as five levels and the capacity to hold 250 tools - with a simple extension of its frame at the rear of the system.
For more information contact:
Tasha Riddell
Mazak Corporation
P.O. Box 970
Florence, KY 41022-0970
859-342-1700
triddell@mazakcorp.com
www.mazakusa.com
Southwest
Dana R. Scott
Mazak SW Technology Center
10950 Greenbend Blvd.
Houston, TX 77667
281-931-7770
dscott@mazakcorp.com
www.mazakusa.com
LA
Richard Cahn
Dixie Mill Machine Tools Co.
901 Tchoupitoulass Street
New Orleans, LA 70152
504-525-6101
800-462-9519
rcahn@dixiemill.com
www.dixiemill.com
OK, AR
Butch Cumminsky
David James
Machinery Resources Inc.
5550 South 94th East Avenue
Tulsa, OK 74145
918-622-6495
800-448-1878
butch@mritul.com
www.mritul.com
N. TX
Chris Papke
Mazak Corporation
2000 East Lamar Blvd, Ste. 600
Arlington, TX 76006
800-642-6110
El Paso, TX
Felipe Arvizo
Magnum Precision Machines Inc.
12025 Rojas Dr. Suite A
El Paso, TX 79936
915-856-7900
farvizo@magnumep.com
www.magnumprecisionmachines.com
NM
Chris Edgar
Magnum Precision Machines, Inc.
8448 Washington Place NE
Albuquerque, NM 87113
505-345-8389
cedgar@magnumabq.com
www.magnumprecisionmachines.com
Southeast
Dave Kennedy
Mazak Southeast Technology Center
1075 Northbrook Parkway
Suwanee, GA 30024
678-985-4800
dkennedy@mazakcorp.com
www.mazakusa.com
TN
Dennis McCurry
Pinnacle Machine Tools, Inc.
5912-A Toole Drive
Knoxville, TN 37919
865-951-0260
mccurry@pinnaclemachine.net
AL
Jerry Edwards
Pinnacle Machine Tool Inc.
141 Nick Fitcheard Road
Huntsville, AL 35806
256-852-0900
edwards@pinnaclemachine.net
NC, VA
Rick Smith
MachineTech, Inc.
8100-J Arrowridge Blvd.
Charlotte, NC 28273
704-665-6301
rick@machinetechcnc.com
www.machinetechcnc.com
GA, SC
Tim Kramer
Premier Engineering Co.
1635 Lakes Pkwy. Ste. U
Lawrenceville, GA 30043-5858
678-442-8382
tim@premierengineering.com
www.premierengineering.com
MS
Richard Cahn
Dixie Mill Machine Tools Co.
901 Tchoupitoulass Street
New Orleans, LA 70152
504-525-6101
rcahn@dixiemill.com
www.dixiemill.com
FL
Mike Hessney
Joe Selway
Unbridled Technologies
P.O. Box 344
Brooksville FL 34605
888-334-8402
info@utechcnc.com
www.utechcnc.com
Northeast
New England, E. NY, NJ
Steve Wilkins
Mazak Northeast Technology Center
700 Old County Cir.
Windsor Locks, CT 06096
800-436-8900 / 860-292-4400
SWilkins@mazakcorp.com
www.mazakusa.com
E. PA, MD, DE
Jim Rutan
Mazak Mid Atlantic Office
1275 Glenlivet Drive
Allentown, PA 18106
jrutan@mazakcorp.com
www.mazakusa.com
W. NY
Bill Miller
A.W. Miller Technical Sales
East Aurora, NY
716-652-8282
bmiller@awmiller.com
www.awmiller.com
W. PA
Russ Weis
A.W. Miller Technical Sales
3 Tara Drive
PO Box 220
Harmony, PA 16037
724-453-1690
rweis@awmiller.com
www.awmiller.com
Midwest
Kevin Bates
Mazak Midwest Technology Center
300 East Commerce Drive
Schaumburg, IL 60173
847-885-8311
kbates@mazakcorp.com
www.mazakusa.com
ND, SD, MN
Joel Lundin
Tony Bailey
Northwest Machine Technologies, Inc.
20851 Commerce Blvd.
Rogers, MN 55374
763-493-3660
tbailey@nwmtec.com
www.nwmtec.com
NE, W. IA
Duane Ohlrich
Industrial Systems & Supply Inc.
2760 E. 29th Avenue
Columbus, NE 68601
402-564-4445
ohlrich@industrial-systems-supply.com
www.industrial-systems-supply.com
E. IA
Kevin Bates
Mazak Midwest Technology Center
300 East Commerce Drive
Schaumburg, IL 60173
847-885-8311
kbates@mazakcorp.com
www.mazakusa.com
MO, S. IL
Bill Summers
Municipal Tool & Machinery Co.
2465 Rock Island Blvd.
Maryland Heights, MO 63043
314-994-9905
bsummers@municipaltool.com
www.municipaltool.com
KS, W. MO
Nick Shelton
Concept Machinery -
A Shelton Machinery Company
6319 W. 110th St.
Overland Park, KS 66211
913-387-4413
nshelton@conceptmachinery.com
www.conceptmachinery.com
WI
Mike Cekanor
Machinery Systems North
3280 Gateway Rd.
Brookfield, WI 53045
262-781-4850
mikec@machsys.com
www.machsys.com
IL, N.W. IN
Eric Hilliard
Machinery Systems Inc.
614 East State Parkway
Schaumburg, IL 60173
847-882-8085
www.machsys.com
E. MI
Peter Addy
Addy Machinery Co.
36055 Groesbeck Highway
Clinton Township, MI 48035
586-741-3000
800-ADDY-NOW
peter@addymachinery.com
www.addymachinery.com
W. MI
Peter Addy
Addy Machinery Co.
3757 Broadmoor Ave SE, Ste. A & B
Grand Rapids, MI 49512
800-AddyNOW
peter@addymachinery.com
www.addymachinery.com
S. OH
Greg Papke
Mazak Corp.
8025 Production Drive
Florence, KY 41042
859-342-1700
gpapke@mazakcorp.com
www.mazakusa.com
IN, KY
Nick Shelton
Shelton Machinery, Inc.
9900 North by Northeast Blvd.
Fisher, IN 46037
317-845-5588
www.sheltonmachinery.com
N. OH
Frank Gibbons
Numerequip
4810 Briar Road
Cleveland, OH 44135
216-265-0400
fgibbons@numerequip.com
www.numerequip.com
West
CO, E. WY
Randy Breitenbach
Action Machinery International
4950 Oakland Street
Denver, CO 80239
303-532-2900
randy@action-machinery.com
www.action-machinery.com
WA, N. ID, OR
Mark Harris
CNC Machine Services, Inc.
7808 184th St. SE
Snohomish, WA 98296
425-788-4500
mharris@cncmachineservice.com
www.cncmachineservice.com
AZ
Chris Edgar
Magnum Precision Machines
3614 E. Southern Ave. #1
Phoenix, AZ 85040
602-431-8300
cedgar@magnumabq.com
www.magnumprecisionmachines.com
UT, S. ID, MT, W. WY
Clark Smith
Smith Machinery Company
41 W. Guest Avenue
Salt Lake City, UT 84115
80l-263-6403
csmith@smithmachinetools.com
www.smithmachinetools.com
S. CA
Richard McCauley
Mazak West Regional Headquarters and
Aerospace Technology Center
1333 West 190th Street
Gardena, CA 90248
310-327-7172
rmccauley@mazakcorp.com
www.mazakusa.com
N. CA
David Lindenmuth
Mazak San Francisco Sales and
Technical Center
1497 N. Milpitas Blvd.
Milpitas, CA 95035
408-941-2240
dlindenmuth@mazakcorp.com
www.mazakusa.com