Makino has announced an expansion to its lineup of EDNC-Series sinker EDM machines, the EDNC10, EDNC15 and EDNC20. Designed to provide a blend of power, speed and precision in large work envelopes, these EDNC sinker EDMs can accommodate massive, heavy workpieces while still producing delicate, fine features with accuracy and enhanced surface finish.
"The construction of the EDNC-Series enables the EDNC10, EDNC15 and EDNC20 to achieve the accuracy and surface finish levels found on smaller sinker EDM machines," said Brian Pfluger, Makino's EDM Product Line Manager.
"Many large-commodity sinker EDMs will see a significant performance drop-off in accuracy, surface finish and machine speed when compared to standard-size sinker EDM machines. The Makino EDNC-Series machines overcome these challenges with key technologies that achieve small-sinker EDM performance on a large-platform machine," Pfluger said.
Die and mold shops, aerospace and power-generation equipment manufacturers can benefit from the larger work sizes of these machines. Specifications are:
The EDNC10, EDNC15 and EDNC20 feature 60 amp (80 Peak amps) power supplies as standard, with 120 or 240 amp options available. The EDNC10 and EDNC15 machines are designed with a full three-sided programmable drop tank, providing ergonomic access for set-up and operation. The EDNC20 features a programmable rise and fall front door, which controls dielectric fluid level, and can be set to match the height of the workpiece while providing optimum viewing of the machining operation.
"Makino's proprietary Hyper technologies included on the EDNC10, EDNC15 and EDNC20 help ensure the ideal mix of speed, surface finish and reduced electrode wear," said a company spokesperson.
HyperCut technology is a generator function that can increase power levels without requiring additional reduction on the electrode, and it improves roughing speeds by up to 30% without affecting workpiece accuracy or surface quality. The technology can minimize electrode wear while providing fast machining speed.
Each EDNC-Series machine is equipped with the Hyper-i control system, which is the same system used on Makino's wire EDM products. "Hyper-i improves productivity by streamlining and simplifying the machine interface so that operators of all skill levels can achieve efficient results," said the spokesperson. Its 24" high-definition monitor provides touch-screen technology similar to that of smartphones and tablets, enabling the use of pinch, swipe and spread movements to select machining conditions for workpiece, electrode material type and the desired shape and surface finish. The Hyper-i Control is enhanced with the integration of on-board digital manuals, intelligent E-Tech Doctor help functions and an e-Learning training system.
SuperSpark IV is an adaptive control technology that optimizes the machining discharge power and electrode jump motions during roughing and finishing operations. "This technology is especially effective on rib or drafted electrodes, and when combined with HyperCut settings, can reduce total machining time by up to 50%," said the spokesperson.
"All EDNC-Series sinker EDMs can be equipped with Makino's proprietary High-Quality Surface Finish (HQSF) technology that yields achievable surface finish capabilities 50% better than conventional surface finishes, regardless of discharge surface area," continued the spokesperson. The HQSF technology can extend tool life through improved surface integrity and can also reduce cycle time even when fine surface finishes are not required.
The HS-Rib Z-axis configuration can reduce rough machining speeds of small electrodes, such as plastic injection tooling ribs or pin gate details, and provide enhanced jump speeds of up to 20 m/min that can reduce machining times by up to 60%.
For more information contact:
Mark Rentschler
Makino Inc.
7680 Innovation Way
Mason, OH 45040
800-552-3288
www.makino.com
Southwest
TX
Andy Mustaine
Single Source Technologies
1701 W. Northwest Hwy.
Grapevine, TX 76051
877-778-5151
andy.mustaine@singlesourcetech.com
OK
KOMT
9511 E 55th Place
Tulsa, OK 74145
918-664-6064
tulsa@komt.com
LA
Michelle Hanberry
c/o Oliver Van Horn Co.
4100 Euphrosine St.
New Orleans, LA 70125
504-210-3042
michelle-hanberry@ohvanhorn.com
NM
Moncktons Machine Tools, Inc.
928 Canvas Back Rd.
Rio Rancho, NM 87144
505-891-8845
hmorrismmt@aol.com
AR
Bill Myers
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
256-301-0040
bill.myers@singlesourcetech.com
Tom Van Hersh
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 901-569-2251
thomas.vanhersh@singlesourcetech.com
Bob Ash
Single Source Technologies (SST)
Tooling & Consumables
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 256-200-1100
bob.ash@singlesourcetech.com
Southeast
SC
Jason Pieowiak
Single Source Technologies (SST)
415 Brookshire Road
Greer, SC 29651
Cell: 864-498-2664
jason.pieowiak@singlesourcetech.com
NC, SC, VA
Cara Kelso
Single Source Technologies (SST)
EDM Consumables
415 Brookshire Road
Greer, SC 29651
Cell: 908-265-7317
cara.kelso@singlesourcetech.com
W. NC, W. SC
Chris Beckman
Single Source Technologies (SST)
415 Brookshire Road
Greer, SC 29651
Cell: 864-915-7307
chris.beckman@singlesourcetech.com
E. VA, E. NC
Bob Hodge
Single Source Technologies (SST)
1316 Elmwood Drive
Colonial Heights, VA 23834
Cell: 804-720-2198
bob.hodge@singlesourcetech.com
Central/S. NC
Bob Winstanley
Single Source Technologies (SST)
148 Hampshire Drive
Mooresville, NC 28115
Cell: 704-577-3391
bob.winstanley@singlesourcetech.com
E. NC, VA
Dan Fredrickson
Single Source Technologies (SST)
415 Brookshire Road
Greer, SC 29651
Cell: 336-831-4246
dan.fredrickson@singlesourcetech.com
AL, GA, MS, TN
Bill Myers
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 256-777-8806
bill.myers@singlesourcetech.com
www.singlesourcetech.com
N. MS, W.TN
Tom Van Hersh
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 901-569-2251
thomas.vanhersh@singlesourcetech.com
W. NC, Central and E. TN
Craig Montalbano
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 865-805-3686
craig.montalbano@singlesourcetech.com
AL
Jack Nash
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 205-612-9371
jack.nash@singlesourcetech.com
GA, FL
Gaylon Gregory
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 770-283-4852
gaylon.gregory@singlesourcetech.com
AL, FL, GA, MS, TN
Bob Ash
Single Source Technologies (SST)
Tooling & Consumables
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 256-200-1100
bob.ash@singlesourcetech.com
FL
Kenneth Boucher
Single Source Technologies (SST)
26762 Success Dr.
Madison, AL 35756
407-988-7195
kenneth.boucher@singlesourcetech.com
Ben Guest
Single Source Technologies (SST)
Tooling & Consumables
26762 Success Dr.
Madison, AL 35756
Cell: (281) 254-0728
ben.guest@singlesourcetech.com
GA
Steve Stratman
Single Source Technologies (SST)
Tooling & Consumables
26762 Success Drive
Madison, Alabama 35756
Cell: 864-247-3567
steve.stratman@singlesourcetech.com
Northeast
CT, DC, DE, MA, MD, NH, NJ,
E. PA, RI, Long Island (EDM only)
Single Source Technologies (SST)
30 Chapin Road, Suite 1208
P.O. Box 655
Pine Brook, NJ 07058-0655
800-336-7283 / 973-227-6601
www.singlesourcetech.com
MA, CT, ME, NH, RI, VT
Able Machine Tool Sales
800 Silver St.
Agawam, MA 01001
413-786-4662
sales@ablemts.com
www.ablemts.com
DE, NJ, MD, E. PA, Long Island
Automation Solutions, Inc.
2 Hagerty Blvd., Ste. 300
West Chester, PA 19382-4956
610-430-3670
inquire@asi-pa.com
www.asi-pa.com
NY
Meagley Machinery, Inc.
8384 Glen Eagle Dr.
P.O. Box 51
Manlius, NY 13104
315-952-8525
W. PA, WV
Allegheny Machine
632 E. McMurray Rd.
McMurray, PA 15317
800-269-4090 / 724-942-4451
www.allegmach.com
Midwest
KY
Technical Equipment Sales
P.O. Box 99793
Louisville, KY 40269
800-852-0582
IN
Technical Equipment Sales
4501 Earhart Lane
Ft. Wayne, IN 46809
800-852-0582
OH
Technical Equipment Sales
10165 International Blvd.
Cincinnati, OH 45246
800-852-0582 / 513-874-0160
Technical Equipment Sales
6900 Southpointe Pkwy., Ste. A
Brecksville, OH 44141
800-852-0582
MI
Single Source Technologies (SST)
2600 Superior Court
Auburn Hills, MI 48326
248-232-6232
ctg@singlesourcetech.com
MN, ND, SD
Productivity, Inc.
15150 25th Ave. N
Minneapolis, MN 55447-1981
763-476-8600
productivity@productivity.com
WI
Preston Giles
Single Source Technologies (SST)
W229 N2510 Duplainville Rd., Unit 2
Waukesha, WI 53186
262-960-0463
IL
Preston Giles
Single Source Technologies (SST)
1135 Jansen Farm Dr.
Elgin, IL 60123
847-468-1295
NE
Productivity, Inc.
13435 A Street
Omaha, NE 68144
402-330-2323
prone@productivity.com
IA
Productivity, Inc.
9440 Atlantic Drive SW
Cedar Rapids, IA 52404
319-734-3403
dsmith@productivity.com
KS
Mark Rehwinkel
Makino - Direct Wichita
2333 S. West St.
Bldg #100, Suite #103
Wichita, KS 67217
513-573-3607
mark.rehwinkel@makino.com
MO
Preston Giles
SST-Midwest
1135 Jansen Farm Drive
Elgin, IL 60123
847-468-1295
West
N. CA, NV
John Cardana
Clancy Machine
3942 Valley Ave., Bldg. K
Pleasanton, CA 94566
925-249-2299
Cell: 925-575-4011
jcardana@clancymachinetool.com
S. CA
Jonathan Hay
Single Source Technologies (SST)
17800 Newhope Street, Ste. K
Fountain Valley, CA 92708-5429
Cell: 380-2336
jonathan.hay@singlesourcetech.com
S. CA (Inland Empire, San Diego)
Wes Colony
Single Source Technologies (SST)
17800 Newhope Street, Ste. K
Fountain Valley, CA 92708-5429
Cell: 714-904-3804
wes.colony@singlesourcetech.com
S. CA (Los Angeles, Orange County)
Bill Gocke
Single Source Technologies (SST)
17800 Newhope Street, Ste. K
Fountain Valley, CA 92708-5429
Cell: 714-659-0552
bill.gocke@singlesourcetech.com
S. CA (San Fernando Valley,
San Gabriel Valley, Santa Clarita Valley)
Rob Wood
Single Source Technologies (SST)
17800 Newhope Street, Ste. K
Fountain Valley, CA 92708-5429
Cell: (805) 844-1331
rob.wood@singlesourcetech.com
AZ
David Gundersen
Single Source Technologies (SST)
17800 Newhope Street, Ste. K
Fountain Valley, CA 92708-5429
Cell: 602-228-0347
david.gundersen@singlesourcetech.com
MT, ID, WY, UT, WY, CO
Mark Smith
Moncktons Machine Tools (CO)
637 Osage Street
Denver, CO 80204
Cell: 303-917-3072
msmith@mmtdenver.com
OR, WA
John Ellis
Ellis Machinery
6226 20th Street E
Fife, WA 98424
253-926-6868
john@ellismachinery.com