OPEN MIND to Present hyperMILL MAXX Machining
May 1, 2017
OPEN MIND will present hyperMILL MAXX Machining at EASTEC. The CAM software product covers 2.5D through 5-axis milling and drilling, mill-turn and specialty applications. MAXX Machining is a set of high performance strategies for roughing, finishing and drilling.
MAXX Machining roughing is based on Volumill toolkit and has been applied to 2.5D pocketing, 3-D roughing and 5-axis roughing. The 5-axis MAXX Machining roughing is well-suited to engine casings and radial components such as in tire mold segments.
MAXX Machining drilling uses 5-axis helical motion to open pockets, with good chip removal and by using standard endmills.
MAXX Machining finishing is a unique highlight that applied conical barrel cutters to large surfaces - planar, ruled or general. The large radius on the barrel allows large step-over, while the conical surface enables short cutters to be used. Holders are assured with the collision detection process. The system also allows the user to control the contact point to increase cutter life or to help reach in specific regions.
hyperMILL is a CAM software with application in 2.5D, 3-D and 5-axis milling and millTURN. The software is available standalone with hyperCAD-S CAD for CAM, or integrated in SolidWorks or Autodesk Inventor.
For more information contact:
OPEN MIND Technologies USA, Inc.
1492 Highland Ave., Unit 3
Needham, MA 02492
888-516-1232
info.americas@openmind-tech.com
www.openmind-tech.com
EASTEC Booth 5240
< back