Fluoramics offers its HinderRUST lubricating rust stoppers for metal fabrication and welding.
HinderRUST features inclulde:
- It is weld-through approved, meaning the rust-stopping product does not need to be removed and no priming is needed prior to welding.
- It offers both short-term and long-term penetration protection against flash rust, pitting and corrosion.
- It is removable for final finishing through normal finish coat preparation procedures such as sanding, grinding, blasting or cleaning with acids and chemicals.
- It may be used as a high-performance cutting oil fluid to lubricate, minimize heat and friction and extend tool life.
HinderRUST for metal fabrication and welding is engineered using HinderRUST technology. It goes on as a mobile liquid that wets to surfaces and creeps into seams. It starts protecting and lubricating surfaces upon application and keeps metals protected against rust before, during and after welding.
Use HinderRUST for metal fabrication and welding for short- and long-term storage plus shipping protection. It prevents flash rust and corrosion on aluminum, brass, alloys, cast iron, hardened steel and stainless steel, plus it does not need to be removed or primed before welding. HinderRUST will not affect weld puddles, bend testing or tensile testing.
Also use this HinderRUST version as a lubricating cutting oil during metal processing and forming operations such as tap & die, drilling, sawing, boring, engraving, bending and machining as it will reduce torque, extend tool life and reduce heat and damage caused by friction, the company reported. Use it also as a lubricant during nut/bolt and final product assembly to prevent rust, metal seizures and galling.
All HinderRUST products are solvent-free and nonhazardous, which means they are safe to use everywhere and will not evaporate over time. The chemistry is both water-displacing and self-repairing. It remains mobile and fills voids created by nicks, scratches or dents.
HinderRUST products are surface active through a chemical process known as adsorption, which spreads the product across the surface of metal and forms a molecular adhesion to the surface. Adsorption creates a thin film of HinderRUST on metal surfaces, which make it much more difficult to wear off.
For more information contact:
Fluoramics, Inc.
902 East 2nd St., Ste. 326
Winona, MN 55987
information@fluoramics.com
www.fluoramics.com