Hyundai WIA has announced the latest addition to its Value Master range of CNC vertical machining centers (VMCs), the F650VM.
The F650VM features travels of 51.2", 26.4" and 25" (XYZ). Standard features include a 30 tool swing arm tool changer, through spindle coolant, Big Plus spindle, rigid tapping and a 10.4" color LCD.
The bed, column and saddle of Hyundai WIA's Value Master Series are designed using finite element analysis (FEA) to help provide enhanced cutting and agility. They are composed of Meehanite cast iron to minimize deformation when performing heavy-duty cuts. The rigid bed is designed to absorb vibration for stable machining.
To help eliminate thermal growth during machining, all axes are driven by high-precision double-nut ballscrews. "The double pretension design provides outstanding positioning and repeatability with virtually no thermal growth," said a company spokesperson. "All ballscrews are connected directly to the servo drive motors without gears or belts, eliminating backlash. Rapid high-speed axis movement is achieved by the use of linear motion guide ways in all three axes. This reduces non-cutting time and decreases machining time for greater productivity." Rapid traverse: 1,418 IPM (36 m/min) in X- and Y-axis and 1,182 IPM (30 m/min) in Z-axis.
The standard Big Plus spindle system (BBT #40) provides dual contact between the spindle face and the flange face of the tool holder. This is intended to increase tool rigidity, reduce run out and add productivity to machining applications.
The F650 Value Master is configured with a 25 HP, 10,000 RPM spindle for taking deep cuts at high speeds. Angular bearings are designed to provide high-speed accel/decel for smooth machining at high RPMs. The main spindle delivers minimal noise and vibration even at the highest cutting speeds, according to the company.
Through spindle coolant is useful for deep hole drilling where it is necessary to keep chip flow clear of the cutting surface. It also helps to increase tool life and decrease cycle time.
Hyundai WIA's s are outfitted with 30 tool, side mount swing-arm type tool changers. This technology offers tool change times of 1.5 seconds, tool-to-tool. "With a capacity of 30 tools (plus one in the spindle), set-up time is reduced and run times can be longer, especially if loaded with redundant tools," said the spokesperson.
The 30 tool swing arm automatic tool changer and magazine are separated by a shutter system that closes during machining, thus keeping chips and fluids clear of the ATC and magazine. When a tool change is required, machining stops, the shutter opens, the ATC exchanges old tool for new, the shutter door then closes and machining begins again.
The Hyundai WIA FANUC i-Series CNC control features a 10.4" color LCD display as standard.
"The Value Master F650VM from Hyundai WIA is ideal for small to medium sized job shops, yet capable enough to handle high production 24/7 environments," said the spokesperson.
For more information contact:
Hyundai WIA Machine America Corp.
265 Spring Lake Dr.
Itasca, IL 60143
201-636-5600
www.hyundai-wiamachine.com
Southwest
TX
Troy Owen
Hillary Machinery Inc.
1825 Summit #207
Plano, TX 75074
800-683-1516
sales@hillaryinc.com
www.hillaryinc.com
OK
Jeff Messenger
Hillary Machinery, LLC
5415 S. 101st E Ave.
Tulsa, OK 74146
800-683-1516
jeffmessenger8@gmail.com
www.hillaryinc.com
AR, LA
John Kearney
Kearney Machinery, Inc.
5211 Linbar Dr., Ste. 511
Nashville, TN 37211
615-332-7400
johnk@kearneymachinery.com
www.kearneymachinery.com
NM
David Mann
Todd Machinery, Inc
385 North 700 West
North Salt Lake, UT 84054
801-294-6390
davidmann@toddmachinery.com
www.toddmachinery.com
Southeast
NC, SC, VA
Chuck Schiefen
Adept Machine Tools, Inc.
152 Ostwalt Amity Rd.
Troutman, NC 28166
704-498-0595
chuck@adeptmachinetools.com
www.adeptmachinetools.com
AL, MS, TN, GA, FL Panhandle
John Kearney
Kearney Machinery, Inc.
5211 Linbar Dr., Ste. 511
Nashville, TN 37211
615-332-7400
johnk@kearneymachinery.com
www.kearneymachinery.com
FL
Robert Arthur
Robert Arthur Machinery LLC
5903 Johns Rd
Tampa, FL 33634
813-887-4455
sales@arthurmachinery.com
www.arthurmachinery.com
Northeast
CT, NH, MA, RI, VT, ME
David Shaby
Compumachine, Inc.
6 Electronics Ave.
Danvers, MA 01923
978-777-8440
dave.s@compumachine.com
www.compumachine.com
NJ, E. PA, MD, DE, NY (including
Long Island, excluding north of
Westchester/Putnam Counties)
Ron Ehrmann
Automation Solutions Inc.
2 Hagerty Blvd., Ste. 300
West Chester, PA 19382-7594
610-430-3670
re@asi-pa.com
www.asi-pa.com
NY (excluding Long Island and south
of Westchester/Putnam Counties)
Jeremy Shamp
Excel Machine Technologies, Inc.
65 Bermar Park
Rochester, NY 14624
585-426-1911
jeremys@emtcnc.com
www.emtcnc.com
W. PA, WV
Chris Perseo
Perseo-Erie, Inc.
2230 West 23rd St.
Erie, PA 16506
814-452-4658
ckp@perseoerie.com
www.perseoerie.com
Midwest
MN, IA, NE, ND, SD, W. WI
Pete Nelson
Productivity, Inc.
15150 25th Ave. North
Minneapolis, MN 55447
9940 Atlantic Dr. SW
Cedar Rapids, IA 52404
8402 S. 117th St.
LaVista, NE 68128
763-476-8600
pnelson@productivity.com
www.productivity.com
KS, MO
Steve A. Davis
SMT/Davis Machine Tool Group
15250 S. Keeler St.
Olathe, KS 66062
913-764-2788
steve@smtco.biz
www.smtco.biz
OH, KY
Kevin Merk
Jones Machinery, Inc.
11118 Adwood Dr.
Cincinnati, OH 45240
513-825-5000
kevin@jonesmachinery.com
www.jonesmachinery.com
WI
Tom Tank
Progressive Machinery, Inc.
11734 W. Park Place
Milwaukee, WI 53224
414-577-3200
tom.t@progressivemachinerywi.com
www.progressivemachinerywi.com
IL
Richard Nemeth
GlobeTec Partners
403 Joseph Drive
South Elgin, IL 60177
847-608-9301
staff@globetec.com
www.globetec.com
IN
John Mangun
Capital Equipment Sales
1639 Armstrong Road
Warsaw, IN 46580
574-527-9121
john.mangun@cap-equip-sales.com
www.cap-equip-sales.com
MI
Tom Clancy
Pinnacle Machine Tool, Inc.
5400 Gatewood Drive
Sterling Heights, MI 48310
586-939-4998
tom@pmtcnc.com
www.pinnaclemachinetool1.com
West
N. CA, NV
Joe Clancy
Clancy Machine Tools, Inc.
3942 Valley Ave Bldg. K
Pleasanton, CA 94566
925-249-2299
jclancy@clancymachinetool.com
www.clancymachinetool.com
S. CA
Dan Royer
Hyundai WIA West Coast Solution Center
11125 Knott Ave., Ste. B
Cypress, CA 90630
714-677-2683
ckrzyston@hyundai-wiamachine.com
www.hyundai-wiamchine.com
WA, OR
Daniel LaMarche
LMI Machinery Inc
970 Industry Drive
Tukwila, WA 98188
866-437-7315
dan@newusedmachines.com
www.newusedmachines.com
AZ
Randy Flores
D&R Machinery
75 W. Baseline Rd, Suite 11
Gilbert, AZ 85233
480-353-9715
randy.flores@dandrmachinery.com
www.dandrmachinery.com
CO, WY, UT
David Mann
Todd Machinery, Inc.
385 North 700 West
North Salt Lake, UT 84054
801-294-6390
davidmann@toddmachinery.com
www.toddmachinery.com
ID
Brian S. Denny
ASI Machine and Supply
1582 E Bramble Lane
Meridian, ID 83642
208-888-9236
cncpros12@gmail.com