Hanwha Machinery America has introduced the XD38HII Swiss-type lathe with bar capacity up to 38 mm (1.50" diameter) at the main and sub spindle. More tool positions and additional machining capabilities are the highlight of this new machine series.
Six leveling pads under the base of the single piece casting equally support the load under the headstock, the guide bushing housing and the full casting supporting the sub spindle at its fully retracted position. A centrally located oversized guide bushing housing is intended to ensure process stability in heavy cutting conditions for tough materials. Two sets of angular contact bearings provide support and accuracy in the guide bushing assembly. The XD38HII machine weighs 9,500 lbs.
The Hanwha XD38HII main spindle is powered by a 10 HP, 8,000 RPM FANUC integral spindle motor. Wye-delta technology is utilized to produce high torque over a wide RPM range.
The XD38HII is equipped with five .625" square O.D. turning tool stations and five ER-16 cross mill / drill units on the main cross slide. The five cross milling units have an 8,000 RPM capacity. There are five front / back facing ER-20M I.D. tool positions on the main tool stand. Two off-center front facing ER-16 mill / drill units are mounted next to the sub-spindle.
The eight position back working station includes four ER-16 mill / drill units and four static I.D. positions. Y2-Axis control provides a 2.835" stroke to position the eight tools. Sub spindle off-center machining, eccentric milling and cross drilling / milling with an optional attachment are now possible.
All mill / drill stations are gear driven and 1.5 HP. All stations are equipped with rigid tapping. The XD38HII has a total of 30 tool positions.
An optional B-axis tool post allows for angular milling and drilling to be performed with 1/1,000° positioning. Four-axis synchronous machining is standard for contour milling.
Both the main and sub spindle have C-axis control and rigid tapping as a standard feature. Simultaneous turning and machining on the main and sub spindle can be performed by utilizing the Hanwha / FANUC 32i-B Two-Path Control.
The user friendly Hanwha Custom Pages and Graphics in the CNC control assist in the machine set-up process, programming and work eject routines. A tool load monitoring system is standard.
The ergonomic design of the Hanwha XD series machines allows for easy access to the tool area for set-up and adjustment with a large door at the operator side and a removable panel on the opposite side of the machine's large work area.
The 11 mill / drill units, parts conveyor, 3-color tower light, coolant flow sensor, power driven back working station, set of ER-20M tool holders, ER collet set and crash protection are all standard features on the XD38HII.
Parts in the .500" to 1.500" diameter range can be machined complete on the Hanwha XD38HII, eliminating secondary milling or drilling operations. According to the company, cycle times are usually 30% to 40% faster when compared to conventional fixed headstock lathes.
For more information contact:
Hanwha Machinery America, Inc
9750 South Oakwood Park Drive
Franklin, WI 53132
414 421-2300
www.hanwhamachinery.com
SOUTHWEST
AR
Techmach Technical Machinery
131 Kelly Dr.
Rogers, AR 72756
479-636-1884
www.techmach.net
NM
Action Machinery
4950 Oakland St.
Denver, CO 80239
303-532-2900
www.action-machinery.com
TX, S. OK
Wise Machinery
2108 Franklin Drive
Arlington, TX 76011
817-905-9473
www.wisemachinery.com
LA
Pinnacle Machine Tool Inc.
5912 A Toole Dr.
Knoxville, TN 37919
865-951-0260
SOUTHEAST
TN, AL, MS, GA
Pinnacle Machine Tool Inc.
5912 A Toole Dr.
Knoxville, TN 37919
865-951-0260
NC, SC, VA
Prematech Machine, Inc.
502A Performance Rd.
Mooresville, NC 28115
704-564-0711
FL
Robert Arthur Machinery LLC
5903 Johns Road
Tampa, FL 33634
813-887-4455
sales@arthurmachinery.com
www.arthurmachinery.com
NORTHEAST
MD, DE
MD Machinery, Inc.
1994 Conan Doyle Way
Eldersburg, MD 21784
410-795-4694
www.mdmachinery.com
NY, NJ, PA
Synergy Machine Tools Inc.
1071 Doans Way
Blue Bell, PA 19422
215-205-0898
www.synergymachinetools.com
CT, ME, MA, NH, RI, VT
Compumachine, Inc.
6 Electronics Ave.
Danvers, MA 01923
978-777-8440
www.compumachine.com
MIDWEST
KS, W. MO
SMT Co.
16055 Apache
Olathe, KS 66062
913-764-2788
www.smtco.biz
MI
Pinnacle Machine Tool Inc.
6633 Allar
Sterling Heights, MI 48312
586-939-4998
MN, SD, ND, IA
Hales Machine Tool, Inc.
2730 Niagra Lane N.
Minneapolis, MN 55447
763-553-1711
www.halesmachinetool.com
N. IL
520 Machinery Sales, LLC
1683 Elmhurst Road
Elk Grove Village, IL 60007
888-520-1768
www.520machinery.com
IN
Meredith Machinery
994 Geredt Court
Greenwood, IN 47143
317-859-9370
KY
Meredith Machinery
2600 Technology Drive
Louisville, KY 40299
502-267-4095
www.meredithmachinery.com
OH
Reynolds Machinery Inc.
760 Liberty Lane
Dayton, OH 45449
937-847-8121
www.reynoldsmachinery.com
WI
Midland Machinery
395 Forest Grove Drive
Pewaukee, WI 53072
262-691-5700
www.midlandmachinery.net
E. MO, S. IL
Techmach Technical Machinery
131 Kelly Dr.
Rogers, AR 72756
479-636-1884
www.techmach.net
NE
Erickson Machine Tools Inc.
409 Market Ave.
Story City, IA 50248
800-247-3905
www.ericksonmachine.com
WEST
AZ
Adams Machinery
215 S. Rockford Dr., Ste. 101
Tempe, AZ 85281
800-728-1881
www.adamsmachineryaz.com
UT
New West Machine Tool Technologies
7990 South 1530 West
West Jordan, UT 84088
801-561-2001
www.newwestmachine.com
N. CA
Performance Machine Tool, Inc.
3305 Edison Way
Fremont, CA 94538
510-249-1000
www.permach.com
S. CA
Protek CNC
65 W. Easy St., Unit 104
Simi Valley, CA 93065
805-579-9995
protekm@pacbell.net
www.protekcnc.com
OR, WA
R-Tec
29030 SW Town Center Loop E.
Suite 202-166
Wilsonville, OR 97070
503-638-6930
rogerm@rteccnc.com
ID, MT
Todd Machinery, Inc.
385 N. 700 West
North Salt Lake, UT 84054
801-294-6390
www.techmach.net
CO
Triad Machine Tool Co.
7881 W. 48th Ave.
Wheat Ridge, CO 80033
303-424-0268
www.triadmt.com