Makino has introduced the L2 vertical machining center (VMC) designed for high-volume, small-part manufacturing. Combining a rigid construction, compact footprint and flexible spindle design, the L2 offers a stable and reliable machine platform for fully unattended, around-the-clock part processing.
"The minimal floor space design and wide range of highly productive standard specifications make the L2 suitable for any type of high-volume, small component processing," said William Howard, Vertical Product Line Manager at Makino. "Given the small size of the machine, it can be effectively employed in virtually any type of workpiece flow arrangement, ranging from manual part transfers to automated part movement facilitated by robotic systems. The L2 can be deployed to meet the specific needs of any manufacturing environment."
The L2 VMC features a compact footprint of 850 mm wide by 2,130 mm long (33.46" by 83.86"), including cooling tank. The X-, Y- and Z-axis travels on the machine are 400 mm by 300 mm by 300 mm (15.74" by 11.81" by 11.81"). A standard, integrated A-axis rotary table and automatic pallet-change system can accommodate workpiece sizes up to 413 mm by 267 mm by 215 mm (16.26" by 10.51" by 8.46"). The A-axis provides six integral ports for hydraulics and pneumatics to support fully automated fixtures. An optional fixed-table configuration without pallet-change system is also available, and can accommodate a maximum workpiece size of 413 mm by 267 mm by 215 mm (16.26" by 10.51" by 8.46").
Non-cut times, including positioning and chip-to-chip times, are reduced with rapid traverse rates of 48,000 mm/min. (1,890"/min.) and acceleration rates of 2.0G, 1.5G and 1.7G in the X-, Y- and Z-axis respectively. The standard A-axis rotary table and automatic pallet changer further enhance productive capabilities, providing 3-second pallet changeovers to maximize spindle utilization and machine productivity. Configured with 0.05-micron scale feedback and a rigid machine design, the L2 machine is both quick and accurate.
Standardly equipped with a 16,000 RPM, HSK-A50 spindle, the L2 accommodates a wide range of applications. Through-spindle, nozzle, overhead shower and even fixture wash coolant systems provide quick and efficient evacuation of chips from the machine work area. Completing the process, a strategically placed, center trough chip conveyor rapidly removes the chip from the machine. Additionally, the L2 features a 30-tool-capacity automatic tool changer that can accommodate tooling up to 80 mm (3.14") in diameter, 250 mm (9.84") in length and 5 kg (11 lbs.) in weight. An optional 8,000 RPM spindle configuration is also available.
The A-axis rotary table facilitates access to multiple sides of the workpiece in a single set-up, and the automatic pallet changer delivers a fast 3-second pallet change. Outfitted with wide, front-access automatic doors, the L2 is quick and convenient for manual loading applications, and ready for integration into a variety of automated load and unload arrangements.
The L2 is designed for simple and easy integration within a variety of automated transfer and loading configurations, including exterior loading arms, gantry loaders and fixed or movable robot loaders. "These automated configurations help maximize the capabilities and value of the L2, resulting in higher production rates, shorter lead times, reduced labor costs and saving floor space," said a company spokesperson.
For more information contact:
Laura Buehner
Marketing Manager
Makino Inc.
7680 Innovation Way
Mason, OH 45040
800-552-3288
laura.buehner@makino.com
www.makino.com/engineering-services
Southwest
TX
Glenn Wise
Consumable Sales Engineer
Single Source Technologies
1701 W. Northwest Hwy.
Grapevine, Texas 76051
877-778-5151
glenn.wise@singlesourcetech.com
www.singlesourcetech.com
N. TX
Steven Neidigk
Single Source Technologies
1701 W. Northwest Hwy.
Grapevine, Texas 76051
877-778-5151
steven.neidigk@singlesourcetech.com
S. TX
Felix Bargas
Single Source Technologies
1701 W. Northwest Hwy.
Grapevine, Texas 76051
877-778-5151
felix.bargas@singlesourcetech.com
OK
KOMT
9511 E 55th Place
Tulsa, OK 74145
918-664-6064
roger_thompson@komt.com
LA
Dennis Mullally
c/o Oliver Van Horn Co.
4100 Euphrosine St.
New Orleans, LA 70125
504-210-3042
dennis-mullally@ohvanhorn.com
NM
Moncktons Machine Tools, Inc.
928 Canvas Back Rd.
Rio Rancho, NM 87144
505-891-8845
msmith@mmtproductivity.com
AR
Tom Van Hersh
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 901-569-2251
thomas.vanhersh@singlesourcetech.com
Southeast
SC
Jason Piechowiak
Single Source Technologies (SST)
415 Brookshire Road
Greer, SC 29651
Cell: 864-498-2664
jason.piechowiak@singlesourcetech.com
www.singlesourcetech.com
Central & S. NC
Alan Godwin
Single Source Technologies (SST)
148 Hampshire Drive
Mooresville, NC 28115
alan.godwin@singlesourcetech.com
E. NC & VA
Dan Fredrickson
Single Source Technologies (SST)
415 Brookshire Road
Greer, SC 29651
Cell: 336-831-4246
dan.fredrickson@singlesourcetech.com
N. MS, W.TN
Tom Van Hersh
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 901-569-2251
thomas.vanhersh@singlesourcetech.com
AL
Jack Nash
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 205-612-9371
jack.nash@singlesourcetech.com
NC, SC, VA
Cara Kelso
Single Source Technologies (SST)
EDM Consumables
415 Brookshire Road
Greer, SC 29651
Cell: 908-265-7317
cara.kelso@singlesourcetech.com
GA
Gaylon Gregory
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 770-283-4852
gaylon.gregory@singlesourcetech.com
AL, FL, GA, MS, TN
Bob Ash
Single Source Technologies (SST)
Tooling & Consumables
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 256-200-1100
bob.ash@singlesourcetech.com
N. FL
Kenneth Boucher
Single Source Technologies (SST)
26762 Success Dr.
Madison, AL 35756
407-988-7195
kenneth.boucher@singlesourcetech.com
S. FL
Ben Guest
Single Source Technologies (SST)
26762 Success Dr.
Madison, AL 35756
Cell: (281) 254-0728
ben.guest@singlesourcetech.com
GA
Steve Stratman
Single Source Technologies (SST)
Tooling & Consumables
26762 Success Drive
Madison, AL 35756
Cell: 864-247-3567
steve.stratman@singlesourcetech.com
Northeast
DE, NJ, MD, E. PA, Long Island
Rob Ehrman
Single Source Technologies (SST)
2 Hagerty Blvd, Ste 300
West Chester, PA 19382-4956
610-430-3670
ron.ehrman@singlesourcetech.com
CT, DC, DE, MA, MD, NH,
NJ, E. PA, RI, Long Island
SST - EDM Consumables
30 Chapin Road Suite 1208
P.O. Box 655
Pine Brook, NJ 07058-0655
800-336-7283 / 973-227-6601
MA, CT, ME, NH, RI, VT
Able Machine Tool Sales
800 Silver St.
Agawam, MA 01001
413-786-4662
sales@ablemts.com
www.ablemts.com
NY, NJ
Jason Chomenko
Single Source Technologies (SST)
2 Hagerty Blvd, Ste 300
West Chester, PA 19382-4956
610-430-3670
jason.chomenko@singlesourcetech.com
NY, NJ
David Lovejoy
Consumable Sales Engineer
SST - EDM Consumables
2 Hagerty Blvd, Ste 300
West Chester, PA 19382-4956
610-430-3670
david.lovejoy@singlesourcetech.com
DE, MD, PA
Kevin Most
EDM Sales Engineer
Single Source Technologies (SST)
2 Hagerty Blvd, Ste 300
West Chester, PA 19382-4956
610-430-3670
kevin.most@singlesourcetech.com
NY
Meagley Machinery, Inc.
8384 Glen Eagle Dr
P.O. Box 51
Manlius, NY 13104
315-952-8525
W. PA, WV
Allegheny Machine
632 E. McMurray Rd.
McMurray, PA 15317
800-269-4090 / 724-942-4451
www.allegmach.com
Midwest
KY
Technical Equipment Sales
P.O. Box 99793
Louisville, KY 40269
800-852-0582
IN
Technical Equipment Sales
4501 Earhart Lane
Ft. Wayne, IN 46809
800-852-0582
OH
Technical Equipment Sales
10165 International Blvd.
Cincinnati, OH 45246
800-852-0582 / 513-874-0160
Technical Equipment Sales
6900 Southpointe Pkwy. Ste. A
Brecksville, OH 44141
800-852-0582
MI
Single Source Technologies (SST)
2600 Superior Court
Auburn Hills, MI 48326
248-232-6232
ctg@singlesourcetech.com
MN, ND, SD
Productivity, Inc.
15150 25th Ave N
Minneapolis, MN 55447-1981
763-476-8600
productivity@productivity.com
WI, IL, MO
Mike McGuire
Single Source Technologies (SST)
1135 Jansen Farm Dr.
Elgin, IL 60123
847-468-1295
NE
Productivity, Inc.
3435 A Street
Omaha, NE 68144
402-330-2323
prone@productivity.com
IA
Productivity, Inc.
9440 Atlantic Drive SW
Cedar Rapids, IA 52404
319-734-3403
dsmith@productivity.com
KS
Mark Rehwinkel
Makino - Direct Wichita
2333 S. West St.
Bldg #100, Suite #103
Wichita, KS 67217
513-573-3607
mark.rehwinkel@makino.com
West
N. CA, NV
John Cardana
Clancy Machine
3942 Valley Ave., Bldg. K,
Pleasanton, CA 94566
925-249-2299
Cell: 925-575-4011
jcardana@clancymachinetool.com
S. CA
Jonathan Hay
Single Source Technologies (SST)
17800 Newhope Street STE K
Fountain Valley, CA 92708-5429
Cell: 714-380-2336
jonathan.hay@singlesourcetech.com
S. CA (Inland Empire,
San Diego, Wes Colony)
Single Source Technologies (SST)
17800 Newhope Street STE K
Fountain Valley, CA 92708-5429
Cell: 714-904-3804
wes.colony@singlesourcetech.com
S. CA (Los Angeles, Orange County)
Bill Gocke
Single Source Technologies (SST)
17800 Newhope Street STE K
Fountain Valley, CA 92708-5429
Cell: 714-659-0552
bill.gocke@singlesourcetech.com
S. CA (San Fernando Valley,
San Gabriel Valley, Santa Clarita Valley)
Rob Wood
Single Source Technologies (SST)
17800 Newhope Street Ste. K
Fountain Valley, CA 92708-5429
Cell: 805-844-1331
rob.wood@singlesourcetech.com
S. CA
Jamie Layden
Consumable Sales Engineer
Single Source Technologies (SST)
17800 Newhope Street Ste. K
Fountain Valley, CA 92708-5429
Cell: 657-240-5414
jamie.layden@singlesourcetech.com
AZ
Lee Janczewski
Single Source Technologies (SST)
17800 Newhope Street Ste. K
Fountain Valley, CA 92708-5429
lee.janczewski@singlesourcetech.com
MT, ID, WY, UT, CO
Moncktons Machine Tools
637 Osage Street
Denver, CO 80204
Cell: 303-917-3072
msmith@mmtproductivity.com
OR, WA
John Ellis
Ellis Machinery
6226 20th Street E
Fife, WA 98424
253-926-6868
john@ellismachinery.com