Browse by Editorial Category
Browse by Edition Date

November 2011

Skip Navigation Links.
Expand Applying TechnologyApplying Technology
Expand Cutting Tools and AccessoriesCutting Tools and Accessories
Expand MaterialHandling-AGVs-Storage-InvCtrlMaterialHandling-AGVs-Storage-InvCtrl
Expand Machine MaintenanceMachine Maintenance
Expand GeneralGeneral
Collapse Finishing-Grinding-AbrasivesFinishing-Grinding-Abrasives
ALMCO Produces Line of Round-Bowl Dryers
New CLEARLOK MAX Topcoat from Birchwood Casey
New Non-Coplanar Connecting Rod Grinding System from C & B Machinery
Chevalier Introduces FMG-1632CNC Grinder
Gardner Abrasives Releases "SpringSupreme" Disc Wheels
CS Unitec Introduces Flexible Drive Shaft
DAPRA Offers Biax Precision Grinding and Deburring Tools
New Air Powered DynaPen from Dynabrade
Engis Introduces FPM-3X Bore Finishing Machine
Fischer Technology Offers Picodentor HM500 Microhardness Measuring System
Agitating, Immersion Parts Washer from Graymills
Robotic Grit-Blasting System from Guyson
New Nanocomposite Coated Saw Blades from ICO Surface Coatings
Kalamazoo Industries Introduces Model KVF3 Vibratory Finisher
MAX-TEK Provides Superabrasive Machining Solutions
New Auto-Balanced 5" Angle Grinder from Metabo
Mitchell Abrasives Offers Cords and Flat Tapes
MultiFinish-America Offers MFD 300e Heavy-Duty Wet/Dry Polishing System
Nagel Precision Offers Alternatives to Bore and Face Grinding
Norton Abrasives Offers Quick Trim Flap Discs
Rex-Cut Products Introduces Quick-Change Abrasive Discs
Rollomatic Offers 6-Axis CNC Tool Grinder and Insert Grinder
Rush Machinery Offers Air Bearing End Mill Grinding Fixture
Sunnen Offers Upgraded HTA Honing System
UGT Expands ID Grinding Capabilities
Unison Announces Model 1500 CNC Profile Grinder
Bio-Circle Parts Washer Eliminates Use of Industrial Solvents
Weiler Introduces Newly Enhanced Burr-Rx Brush

show all editions →

Click here to watch Tutorial Videos >

Nagel Precision Offers Alternatives to Bore and Face Grinding



Nagel Precision has introduced a new honing and cup wheel face super finishing system developed for small and medium volume production. It is designed to be a lower cost and higher quality alternative to ID and face grinding, the company said.

"This compact system combines two proven technologies, ECO 40 honing and SPV 150 cup wheel face finishing machines, into a single compact system," said a company spokesperson. "It generates sub micron bore to face perpendicularity and mirror finishes on bores as well as faces for a fraction of the cost of ID/face grinders.

"This hone and cup wheel finisher was developed to address the following shortcomings of the grinding process: When the faces are double-disk ground, there is no control over the bore-to-face perpendicularity. With ID grinding, when performed on a twin spindle machine, this problem will be overcome as the part is held in the same position as the face and bore is ground. However, for parts with smaller diameters and relatively deep bores-with length to diameter ratio of 2:1-honing has a real advantage in speed of material removal, and over 5:1 deflection of grinding spindle will cause the bore to taper. If a finer bearing like plateau honed finish is desired, neither ID grinding nor double-disk face grinding can achieve it, and a secondary finishing operation typically has to be instituted. Finally, it is easier to rework and remove 1 or 2 microns of stock with honing and face finishing, in case it is needed to bring a part into specification. It is very difficult to accomplish this with conventional grinding operation."

The ECO 40 honing head can hone bores up to 50 mm in diameter. In-process air sizing can be embedded in the tool for bores over 25 mm in diameter. The in-process air gage automatically measures the bore form error and makes automatic adjustments to correct the form error. Larger bores can be equipped with a dual expansion system, this system permits mounting, roughing and finishing abrasives with the same honing tool along with the in-process air gage. This permits roughing, finishing and gauging all in one tool, eliminating multiple stations. The SPV 150 cup wheel face finishes the clamping of the part on the bore and generates sub micron bore to face perpendicularity and flatness.

Typical applications include pinion gears, fuel injection components and any other components that require fine surface finish as well as excellent bore to face perpendicularity, the company said.

For more information contact:

Sanjai Keshavan

Manager - ECO Hone Division

Nagel Precision, Inc.

288 Dino Drive

Ann Arbor, MI 48103

734-426-1812

www.nagelusa.com

< back

Email   email