Browse by Editorial Category
Browse by Edition Date

November 2011

Skip Navigation Links.
Expand Applying TechnologyApplying Technology
Expand Cutting Tools and AccessoriesCutting Tools and Accessories
Expand MaterialHandling-AGVs-Storage-InvCtrlMaterialHandling-AGVs-Storage-InvCtrl
Expand Machine MaintenanceMachine Maintenance
Expand GeneralGeneral
Collapse Finishing-Grinding-AbrasivesFinishing-Grinding-Abrasives
ALMCO Produces Line of Round-Bowl Dryers
New CLEARLOK MAX Topcoat from Birchwood Casey
New Non-Coplanar Connecting Rod Grinding System from C & B Machinery
Chevalier Introduces FMG-1632CNC Grinder
Gardner Abrasives Releases "SpringSupreme" Disc Wheels
CS Unitec Introduces Flexible Drive Shaft
DAPRA Offers Biax Precision Grinding and Deburring Tools
New Air Powered DynaPen from Dynabrade
Engis Introduces FPM-3X Bore Finishing Machine
Fischer Technology Offers Picodentor HM500 Microhardness Measuring System
Agitating, Immersion Parts Washer from Graymills
Robotic Grit-Blasting System from Guyson
New Nanocomposite Coated Saw Blades from ICO Surface Coatings
Kalamazoo Industries Introduces Model KVF3 Vibratory Finisher
MAX-TEK Provides Superabrasive Machining Solutions
New Auto-Balanced 5" Angle Grinder from Metabo
Mitchell Abrasives Offers Cords and Flat Tapes
MultiFinish-America Offers MFD 300e Heavy-Duty Wet/Dry Polishing System
Nagel Precision Offers Alternatives to Bore and Face Grinding
Norton Abrasives Offers Quick Trim Flap Discs
Rex-Cut Products Introduces Quick-Change Abrasive Discs
Rollomatic Offers 6-Axis CNC Tool Grinder and Insert Grinder
Rush Machinery Offers Air Bearing End Mill Grinding Fixture
Sunnen Offers Upgraded HTA Honing System
UGT Expands ID Grinding Capabilities
Unison Announces Model 1500 CNC Profile Grinder
Bio-Circle Parts Washer Eliminates Use of Industrial Solvents
Weiler Introduces Newly Enhanced Burr-Rx Brush

show all editions →

Click here to watch Tutorial Videos >

Engis Introduces FPM-3X Bore Finishing Machine



"Manufacturers of earth moving equipment and construction machinery, using large hydraulic valve bodies, are engaged in a global market which demands improved product performance and quality," said an Engis spokesperson.

"A major challenge faced in this industry is the precision finishing of hydraulic valve bores, in particular aligning and finishing the bores once the bodies have been stacked. Engis Corporation has engineered a solution to this manufacturing challenge."

Engis has just released a new three axis single-pass bore finishing system, the FPM-3X, which can finish stacked valve body bores to a cylindricity of 2 microns and a diameter of +/- 1 micron, especially those with multiple bores and bores of different diameters.

The FPM-3X features full CNC controls with a Z-stroke of 750 mm, an X-stroke of 1,066 mm and a Y-stroke of 100 mm. The slide base can accommodate parts up to 3,000 lbs. An 8-13 pocket automatic tool changer allows the machine to complete bores from rough to finish without operator involvement. Programming is done via standard G-code.

Using a systems approach, Engis helps manufacturers optimize bore finishing results by selecting the best combination of superabrasives, tool design, tool holding, part fixturing, cooling/filtration and automation package options.

Traditionally, manufacturers finish each valve individually and then stack valves together. Unfortunately, the torque subsequently applied to the stack distorts bore geometry.

"Valves are the heart of heavy equipment hydraulics," said Product Manager Robert Marvin. "They coordinate the flow of fluid. Bores with cylindricity problems may experience fluid leakage, premature wear or other failures."

"The FPM-3X enables bore finishing after stacking the valves, which improves cylindricity and roundness," said the spokesperson. "To precisely locate the bore under the BT-40 spindle, the FPM-3X uses a wireless Renishaw CMM probe to establish bore location; position information is automatically translated into G-Code coordinates."

Marvin notes that the FPM-3X also addresses other shortcomings of traditional bore finishing approaches. One approach is to finish the bores on a large indexing machine or in a series of machining cells.

"These options offer good accuracy and throughput, but are usually dedicated to high-volume part runs," he said. "Conversely, the FPM-3X provides significant flexibility. An operator can run a one-off part and change to another part fairly quickly. For companies that want to finish a variety of different parts, the FPM-3X significantly reduces downtime."

"The FPM-3X also increases quality compared to conventional bore honing, where the abrasive tool expands," said the spokesperson. "Engis' single-pass process removes material by using progressively larger tools in ever-reducing increments with progressively finer diamond size.

For more information contact:

Engis Corporation

105 West Hintz Road

Wheeling, IL 60090

800-993-6447 / 847-808-9400

info@engis.com

www.engis.com

< back

Email   email