Browse by Editorial Category
Browse by Edition Date

November 2011

Skip Navigation Links.
Expand Applying TechnologyApplying Technology
Expand Cutting Tools and AccessoriesCutting Tools and Accessories
Expand MaterialHandling-AGVs-Storage-InvCtrlMaterialHandling-AGVs-Storage-InvCtrl
Expand Machine MaintenanceMachine Maintenance
Expand GeneralGeneral
Collapse Finishing-Grinding-AbrasivesFinishing-Grinding-Abrasives
ALMCO Produces Line of Round-Bowl Dryers
New CLEARLOK MAX Topcoat from Birchwood Casey
New Non-Coplanar Connecting Rod Grinding System from C & B Machinery
Chevalier Introduces FMG-1632CNC Grinder
Gardner Abrasives Releases "SpringSupreme" Disc Wheels
CS Unitec Introduces Flexible Drive Shaft
DAPRA Offers Biax Precision Grinding and Deburring Tools
New Air Powered DynaPen from Dynabrade
Engis Introduces FPM-3X Bore Finishing Machine
Fischer Technology Offers Picodentor HM500 Microhardness Measuring System
Agitating, Immersion Parts Washer from Graymills
Robotic Grit-Blasting System from Guyson
New Nanocomposite Coated Saw Blades from ICO Surface Coatings
Kalamazoo Industries Introduces Model KVF3 Vibratory Finisher
MAX-TEK Provides Superabrasive Machining Solutions
New Auto-Balanced 5" Angle Grinder from Metabo
Mitchell Abrasives Offers Cords and Flat Tapes
MultiFinish-America Offers MFD 300e Heavy-Duty Wet/Dry Polishing System
Nagel Precision Offers Alternatives to Bore and Face Grinding
Norton Abrasives Offers Quick Trim Flap Discs
Rex-Cut Products Introduces Quick-Change Abrasive Discs
Rollomatic Offers 6-Axis CNC Tool Grinder and Insert Grinder
Rush Machinery Offers Air Bearing End Mill Grinding Fixture
Sunnen Offers Upgraded HTA Honing System
UGT Expands ID Grinding Capabilities
Unison Announces Model 1500 CNC Profile Grinder
Bio-Circle Parts Washer Eliminates Use of Industrial Solvents
Weiler Introduces Newly Enhanced Burr-Rx Brush

show all editions →

Click here to watch Tutorial Videos >

New Non-Coplanar Connecting Rod Grinding System from C & B Machinery



C & B DG-2H-30 Double Disc Connecting Rod Grinding System

Non-Coplanar Automotive Connecting Rod

C & B Machinery has improved productivity and flexibility of its double disc non-coplanar connecting rod grinding system first introduced in 2009 for the Chevrolet Volt 1.4L auxiliary engine, the company said.

The first grinding system produced a stepped connecting rod from a parallel (or coplanar) rod. The 1.4L Chevy Volt connecting rod has a 1.2 mm symmetrically smaller crankshaft end width, and both the pin and crank ends of the rod are ground in one sequence. At the time, the system was considered the most advanced double disc grinder ever produced by C & B, according to the company.

"This latest system, recently shipped to Eston Manufacturing Division of Linamar Corporation, is grinding a 1.8L connecting rod with a symmetrical reduction of the pin end of 3.8 mm," said a company spokesperson. "As before, the challenge was to produce this part from a coplanar connecting rod in one operation. Stock removal from the pin end of the connecting rod is 5 mm and stock removal from the crank end is 1 mm. Previously, this connecting rod required three grinding operations to complete and the crank and pin end were ground on two separate machines.

"C & B's application engineers took the challenge to task developing a special tooling package and unique 2-stage grinding cycle which first rough grinds the pin end to a stock condition equal to the crank end. It then finish grinds the crank and pin end of the connecting rod simultaneously. Grinding the crank and pin ends at the same time produces much better symmetry between the two. Additionally the grinder exceeds Eston's 1.67 Ppk requirements for size, parallel and flatness."

The grinding system also includes a post process gaging system with automatic feedback to the grinding wheel infeed servos providing automatic compensation for wheel wear. The gage also inspects step relationship between the crank and pin end faces.

The C & B model DG-2H-30/SA Connecting Rod grinding system has the ability to grind parallel parts, non-coplanar parts, pin end only or crank end only configurations with simple changeover. "This bodes well with today's manufacturing requirements: lower production rates, better flexibility and a never-ending demand for lower machining costs per piece," said the spokesperson.

With models utilizing up to 42" diameter grinding wheels, large diesel connecting rods can also be produced in this manner.

For more information contact:

C & B Machinery

12001 Globe Street

Livonia, MI 48150

734-462-0600

www.cbmachinery.com

< back

Email   email