"The new Swiss ST 26 is a high-performance Swiss type turning center with 7 linear axes + 2 C-axes and two completely independent tool systems for parts up to 1 inch diameter (0.9 inch without bar prep) and up to 8.6 inches long with guidebush," said a Tornos spokesperson. With an independent dual slide system, the Swiss ST 26 allows up to three tools in the cut simultaneously and up to 36 tools total (17 live) for pinch milling, turning and drilling. The system works with or without guidebush.
The Swiss ST 26 Medical configuration comes with three mill/drill attachments for the main spindle, and five mill/drill attachments for the counter spindle, plus dual threadwhirlers that allow cutting of medical bone screws with two different angled threads. Also included are toolholders for five turning tools on the main plus another three turning tools on the main and counter; an offset tool block with eight bores to accept holders for work in the main (4X) and counter (8X); a tool block with two bores to accept drill holders for deep drilling; and a two toolholder for end working positions with an ESX20 collet.
The machine has a large, easy-access workzone (with access to tools from both sides of the machine) and spindles that run 0-10,000 RPM in 0.9 seconds. Additionally, an easy access control panel is mounted on a swiveling arm. Designed for autonomy, the Swiss ST 26 has an open design for ideal chip evacuation into a large pan, automatic central lubrication system and a large coolant tank.
A wide selection of attachments and accessories are available for the Swiss ST 26, making this a flexible solution for high-tech industries. In addition to the Medical configuration, Tornos also offers Starter and Advanced packs for automotive, aerospace, electronic and other applications.
For more information contact:
Tornos US
840 Parkview Blvd.
Lombard, IL 60148
630-812-2040
info-us@tornos.com
www.tornos.us
Tornos US
1 Parklawn Drive
Bethel, CT 06801
203-775-4319
info-us@tornos.com
www.tornos.us
Southwest
TX
Troy Owen
Hillary Machinery, Inc
1825 Summit #207
Plano, TX 75074
800-683-1516
sales@hillaryinc.com
www.hillaryinc.com
LA
Scott Eddins
H&S Machinery Co.
1941 Industrial Blvd.
Harvey, LA 70058
504-347-5707
sales@hsmachinery.com
NM
Frank Vuksinich
Foothills Machinery Sales
6855 W 116th Ave.
Broomfield, CO 80020
303-466-3777
info@foothillsmachinery.com
www.foothillsmachinery.com
AR
Brian Stafford
Stafford Machinery Co.
8 Shackleford Plaza, Suite 314
Little Rock, AR 72211
501-228-9950
stafmachco@msn.com
Southeast
GA, VA, NC, SC, TN,
MS, AL, FL panhandle
Steven Flint
Flint Machine Tools, Inc
3710 Hewatt Court
Snellville, GA 30039
770-985-2626
stevef@flintmachine.com
www.flintmachine.com
FL (except panhandle)
Jerry Adams
Focus Machine Tools, LLC
3113 Club Drive Unit 218
Port Charlotte, FL 33953
941-661-1798
jafocusmachinetools@comcast.net
www.focusmachinetools.com
Northeast
NY (except Long Island)
Paul Meagley
Meagley Machinery, Inc.
P.O. Box 51
Manlius, NY 13104-0051
315-952-8525
pmeagley@twcny.rr.com
www.meagleymachinery.com
NH, VT, MA, ME, RI, CT
Ken Otzel
High Performance Machinery, LLC
313 South Main Street
Orange, MA 01364
508-958-5565
hpm@mas.rr.com
www.highperformancemachinery.com
MD, DE, PA, WV
Mark Conti
Holco, Inc.
329 Francis Ave
Ambler, PA 19002
215-283-0156
markc@holcosales.com
www.holcosales.com
NJ, NY (Long Island tip)
Kevin Hayes
Tornos Technologies
1 Parklawn Blvd
Bethel, CT 06801
630-812-2040
info-us@tornos.com
www.tornos.us
Midwest
OH, KY
Jeff Clasen
TekQuest, LLC
36 South Franklin Street
Chagrin Falls, OH 44022
440-247-5333
jclasen@tekquestllc.com
www.tekquestllc.com
NE, KS, MO
Kevin Hayes
Tornos Technologies
1 Parklawn Blvd
Bethel, CT 06801
630-812-2040
info-us@tornos.com
www.tornos.us
MN, IA, ND, SD, Northwest WI
Kevin Manion
Nanotech Machinery Solutions Inc.
8760 Jefferson Highway
Osseo, MN 55369
763-425-6266
kevin@nanomach.us
www.nanomach.us
MI
Tom Broe
Advanced Manufacturing Products, LLC
601 Harwood Street
Jackson, MI 49203
734-335-2045
tbroe@ampllc.co
www.ampllc.co
IL, IN
John Schneider
520 Machinery Sales
620 Estes Ave.
Schaumburg, IL 60193
888-520-1768
john@520machinery.com
www.520machinery.com
WI (excluding N.W.)
Phil Miller
Miller Industrial Services, Inc
7820 W. Coventry Drive
Franklin, WI 53132
414-425-4075
admin@millerisi.com
www.millerisi.com
West
N. CA, NV (except Clark Co.)
Jim Selway
CNC Solutions
1610 Centre Point Drive
Milpitas, CA 95035
408-586-8236
jselway@cncsolutions.biz
www.cncsolutions.biz
S. CA, Clark Co. NV
Jay Davis
DMark
10552 Humbolt Street
Los Alamitos, CA 90720
562-690-7616
jdavis@dmarkcorp.com
WA, OR
Bruce Ellis
Ellis Machinery & Equipment, Inc.
1505 South 356th Street, Unit 116
Federal Way, WA 98003
bruce@ellismachinery.com
www.ellismachinery.com
CO, WY
Frank Vuksinich
Foothills Machinery Sales
6855 W 116th Ave
Broomfield, CO 80020
303-466-3777
info@foothillsmachinery.com
www.foothillsmachinery.com
MT, ID, UT
Jim Grisley
JM Grisley Machine Tools, Inc.
1485 South 300 West
Salt Lake City, UT 84115
801-486-7519
jgrisleyma@aol.com
www.jmgrisleymachine.com