LSA Laser announced the addition of femtosecond laser processing capabilities for medical device manufacturing. Femtosecond lasers are suited for micromachining applications for drilling and cutting high-precision holes and shapes free from thermal damage.
Femtosecond lasers are ultrafast laser systems that essentially vaporize matter without heat-affected zone. "This capability creates new opportunities for advanced micro designs, particularly for difficult to process metals that are not feasible with conventional lasers and for composite materials," said Tom Noll, President of LSA.
"This new capability also has good potential for cutting of multiple materials at once or to drill and cut micro shapes, which reduces operations in the manufacturing of medical assemblies such as catheters. The ultrafast laser allows LSA Laser to process a wide range of materials and composites including polymers, platinum, stainless steel, nitinol and more," said a company spokesperson.
Traditional laser processes are limited to cutting one type of material at a time, for example metals or polymers. The femtosecond laser allows the cutting of multiple layered materials in one process step. This new system was custom designed to be flexible and suitable for on or off axis cutting and R&D or volume applications. It can handle both flat stock and tube cutting on the same system with minimal set-up.
The shortened pulse from a femtosecond laser decreases the heat-affected zone around the material being cut, resulting in less damage to the surrounding areas and an overall cleaner cut. This allows parts processed with this system to need little to no post process cleaning or other post processing.
LSA Laser is a contract manufacturer of medical device components and assemblies with ISO 13485:2003 certification and over 15 years experience supplying the medical device industry. LSA Laser operates a 26,000 square foot manufacturing and office facility. It utilizes 38 laser welding and cutting systems with up to six-axis motion control and computer aided manufacturing capabilities.
LSA processes include laser cutting, laser welding, laser ablation and laser marking used in a broad range of medical devices including defibrillation leads, stents, catheters, surgical instruments, dental instruments, orthopedics, hearing devices, neuro applications and more. Many of the processes include materials such as platinum, titanium, nitinol and nichrome in sizes as small as .001 inch.
For more information contact:
Tom Noll, President
LSA Laser
5015 Cheshire Parkway North
Plymouth, MN 55446
763-744-0246
info@lsalaser.com
www.lsalaser.com