Adding a fast rotary table to a fast machine is a proven way to boost productivity, reduce set-ups and increase accuracy on multi-op parts - all while slashing cycles times.
The HRC210 from Haas Automation is a high-speed, cam-driven rotary table that provides cutting and indexing speeds up to 830°/second - eight times faster than a standard Haas HRT210. It provides 110 ft-lbs. (149 Nm) of spindle torque for synchronous 4-axis machining, and has a pneumatic brake that yields 134 ft-lbs. (182 Nm) of holding torque for stationary work. Indexing accuracy is +/-30 arc-sec, with repeatability of 4 arc-sec. The 8.27" (210 mm) platter of the HRC210 has a center height of 6.000" (152.40 mm), with a 2.00" x 1.91" deep (50.8 mm x 48.5 mm deep) pilot bore and 1.77" (45 mm) through hole. Six radial T-slots simplify fixture and workpiece mounting, and both manual and pneumatic tailstocks are available for additional workpiece support.
The HRC210 is driven by a high-performance roller cam system that uses a high-torque servomotor to drive a globoidal cam meshing with cam followers equally spaced around the diameter of a roller gear. Needle bearings in the cam followers provide smooth contact with the cam, and a precision-engineered cam profile ensures accurate speeds and motion. Because the roller drive is preloaded during assembly, the system yields high stiffness, high torque and high speeds, while providing low wear characteristics and reducing maintenance.
For more information contact:
Haas Automation, Inc.
2800 Sturgis Road
Oxnard, CA 93030
800-331-6746
www.HaasCNC.com
Southwest
AR
Michael Garner
HFO - A Div. of
Jeffreys Mfg. Solutions
7123 Interstate 30, Ste. 30
Little Rock, AR 72209
501-562-8040
S. TX
Ronnie Dutton
HFO - A Div. of
Champions Machine Tool Sales
1151 E. Cypresswood
Spring, TX 77373
800-375-5673 / 281-355-9220
Central TX
Eric Foster
HFO - A Div. of
Champions Machine Tool Sales
375 Commercial Drive
Buda, TX 78610
800-375-5673
LA
Pat Kane
HFO - A Div. of
Machine Tools, Inc.
914 W. Pont des Mouton Rd.
Lafayette, LA 70507
800-448-2084
N. TX
Michael Johns
HFO - A Div. of
CNC Machine Tools
1633 Firman Dr.
Richardson, TX 75081
972-231-2802
OK
Ken Timmons
HFO - A Div. of
Timco Machine Tools
1720 North Juniper Avenue
Broken Arrow, OK 74012
866-HAAS-CNC (422-7262)
NM
George Michel
HFO - Denver, A Div. of
Moncktons Machine Tools
637 Osage Street
Denver, CO 80204
303-571-4933
mmt@mmtdenver.com
Southeast
TN
Michael Garner
HFO - Tennessee
1897 General George Patton Dr.
Franklin, TN 37068
615-599-5959
AL, NC, VA
C. Brooks Barwick
HFO - A Div. of
Jeffreys Mfg. Solutions
8500 Triad Drive
Colfax, NC 27235
336-665-1080
SC
HFO - A Div. of
Jeffreys Mfg. Solutions
Spartanburg Community College
1875 East Main Street, Suite 3
Duncan, SC 29334
336-665-1080
GA
HFO Atlanta - A Div. of
Jeffreys Mfg. Solutions
4034 Enterprise Way, Ste. 120
Flowery Branch, GA 30542
FL
Scott Myre
HFO - A Div. of
CNC Machine Tools
913 S US Hwy. 301 South
Tampa, FL 33619-4338
813-628-0665
MS
Don Dison
HFO - A Div. of
Machine Tools, Inc.
276 N. Nissan Pkwy, Ste. C
Canton, MS 39046
800-448-2084 / 601-855-0480
Northeast
CT, MA, ME, NH, RI, VT
Nick Schuchardt
HFO - A Div. of Trident
790 Marshall Phelps Road
Windsor, CT 06095
860-687-2466
E. NY, N. NJ, Long Island
Neil McGill
HFO - A Div. of
Allendale Machinery Systems
16 Park Way
Upper Saddle River, NJ 07458
800-972-9401 / 800-224-0528
info@hfoallendale.com
www.HFOAllendale.com
W. PA
Tom Jonas
HFO - A Div. of DSM Machinery
549A Keystone Drive
Warrendale, PA 15086
724-778-3220
tj@gosiger.com
www.gosiger.com
WV
Dave Tucker
HFO - A Div. of
Midwest Mfg. Resources
10165 International Blvd.
Cincinnati, OH 45246
513-874-8692 / 800-874-0160
dtucker@hfomidwest.com
W. NY, Central NY
Mike Cregg
HFO - A Div. of NYMAT
2650 Baird Road
Fairport, NY 14450
585-641-4227
customeradvocate@nymat.com
DC, DE, MD, S. NJ, E. PA
Ed Kilgallon
HFO - A Div. of Lance Co.
3599 Marshall Lane, Unit A
Bensalem, PA 19020
215-245-5500
Midwest
N. IL, N.W. IN
HFO Chicago
555 Busse Road
Elk Grove Village, IL 60007
877-440-HAAS
www.hfochicago.com
E. MI
Fred Schultz
HFO - A Div. of Gerotech
29220 Commerce Dr
Flat Rock, MI 48134
734-379-7788
sales@hfogerotech.com
www.hfogerotech.com
W. MI
Tom Dawson
HFO - A Div. of Gerotech
2716 Courier Court N.W.
Grand Rapids, MI 49544
616-735-1100
sales@hfogerotech.com
www.hfogerotech.com
S. MI
HFO - A Div. of Gerotech
29220 Commerce Dr
Flat Rock, MI 48134
734-379-7788
sales@hfogerotech.com
www.hfogerotech.com
E. WI, U.P. MI
Mark MacVicar
HFO - A Div. of Gosiger
3315 Intertech Dr.
Brookfield, WI 53045
262-373-5050
mmacvicar@gosiger.com
S. IN
Dave Tucker
HFO - A Div. of Midwest Mfg.
5733 West Minnesota St
Indianapolis, IN 46241
800-833-0246
dtucker@hfomidwest.com
N.E. IN
Dave Tucker
HFO - A Div. of Midwest Mfg.
2101 E. Coliseum Blvd.
ECTS Building, Room ET 137
Fort Wayne, IN 46809
800-833-0246
dtucker@hfomidwest.com
N. OH
Dave Tucker
HFO - A Div. of Midwest Mfg.
1993 Case Pkwy. N.
Twinsburg, OH 44087
800-833-0246
dtucker@hfomidwest.com
S. OH, KY
Dave Tucker
HFO - A Div. of Midwest Mfg.
7595 Innovation Way, Ste. 100
Mason, OH 45040
800-833-0246
dtucker@hfomidwest.com
S. IL, E. MO
HFO - A Div. of NYMAT
136 Weldon Pkwy
St Louis, MO 63043
314-567-4227
hfo@nymat.com
W. MO, KS
HFO - A Div. of NYMAT
15661 South Mahaffie St.
Olathe, KS 66062
913-768-HAAS (4227)
hfo@nymat.com
MN, W. WI, ND, SD
Greg Buck
HFO - A Div. of Productivity
15200 25th Ave N, Ste 120
Minneapolis, MN 55447
763-742-1263
hfomn@productivity.com
NE, W. IA
Dan Caskey
HFO - A Div. of Productivity
8402 S 117th St
Omaha, NE 68128
402-758-9143
dcaskey@productivity.com
E. IA
Dennis Smith
HFO - A Div. of Productivity
9440 Atlantic Dr.
Cedar Rapids, IA 52404
319-734-3408
dsmith@productivity.com
West
AZ, S. NV
Patrick Ellison
HFO-Phoenix, A Div. of
Ellison Machinery Co.
1610 S. Priest Dr. #101
Tempe, AZ 85281
480-968-5877
sales@ellisonaz.com
CA (Los Angeles, Ventura Counties)
HFO-Torrance, A Div. of
CNC Machine Tools
580 Madrid Ave
Torrance, CA 90502
310-381-0750
Cell: 760-390-9253
jphillips@haasfactoryoutlet.com
S. CA
HFO-Anaheim, A Div. of
Machining Time Savers Inc.
1338 S. State College Pkwy.
Anaheim, CA 92806
714-635-7373
sales@mtscnc.com
N. CA, N. NV
HFO-Union City, A Div. of
Selway Machine Tool
29250 Union City Blvd.
Union City, CA 94587
888-735-9290
HFO@selwaytool.com
CO, WY
HFO-Denver, A Div. of
Moncktons Machine Tools
637 Osage Street
Denver, CO 80204
303-571-4933
mmt@mmtdenver.com
ID, MT
George Cobb
HFO-Boise, A Div. of
King Machine Inc
443 W. Pennwood St.
Meridian, ID 83680
208-345-9600
sales@kingmach.com
OR
HFO-Portland, A Div. of
Selway Machine Tool
25599 SW 95th Ave., Ste G.
Wilsonville, OR 97070
888-735-9290
HFO@selwaytool.com
UT
HFO-Salt Lake City, A Div. of
Moncktons Machine Tools
3676 W. California Ave, Ste. A117
Salt Lake City, UT 84104
801-886-2221
mmt@mmtutah.com
WA
HFO-Seattle, A Div. of
Selway Machine Tool
4108 B Place NW #A
Auburn, WA 98001
866-844-5400
HFO@selwaytool.com