Mazak's new
Vertical Center Nexus 510C-II HS 5X is designed for high speed machining
applications. Equipped with a 40-taper, 50-HP, 18,000-RPM integral
spindle/motor, the VCN 510C-II HS 5X offers a large machining area, with X-axis
travel of 41-inches (1,050 mm) and full Y- and Z-axis ranges of 20-inches (510
mm).
"Users benefit from full five-axis contouring due to the inclusion of a tilting rotary table that provides 360-degree rotation and 120-degree tilt," said a spokesperson. "The table delivers exceptionally high positioning accuracy ( 10 arc-sec) and repeatability (8 arc-sec) through its zero-backlash Roller-Drive mechanism and 0.0001-degree resolution.
"The VCN 510C-II HS 5-axis has a maximum workpiece weight of 440 lbs. (200 kg) and a maximum part swing of 21 in (533.4 mm). The machine's three linear axes attain high-speed rapid-traverse rates of 1,417-IPM at 0.5 G acceleration and 5.2 seconds chip-to-chip tool change time further slashes non-cutting time in favor of increased production. The machine is equipped with a 30-tool ATC for generous tool storage capacity."
For more information contact:
George Yamane
Mazak Corporation
P.O. Box 970
Florence, KY 41022-0970
859-342-1700
Fax: 859-342-9524
Southwest
Dana Scott
Mazak Southwest Technology Center
770 North Belt East
Houston, TX 77060
281-931-7770
Fax: 281-931-6191
LA
Richard Cahn
Dixie Mill Machine Tools Co.
901 Tchoupitoulass Street
New Orleans, LA 70152
504-525-6101
800-462-9519
Fax: 504-525-3089
OK, AR
Rick Engles
Machinery Resources Inc.
5550 South 94th East Avenue
Tulsa, OK 74145
918-622-6495
800-448-1878
Fax: 918-663-0923
N. TX
Bernie Lopez
InterTech, Inc.
2100 North Hwy. 360 #2103
Grand Prairie, TX 75050
972-647-0707
Fax: 972-641-6191
Bernie@intertechcncmachines.com
El Paso, TX
Felipe Arvizo
Magnum Precision Machines Inc.
12025 Rojas Dr. Suite A
El Paso, TX 79936
915-856-7900
Fax: 915-857-4700
www.magnumprecisionmachines.com
NM
Chris Edgar
Magnum Precision Machines, Inc.
8448 Washington Place NE
Albuquerque, NM 87113
505-345-8389
Fax: 505-344-7176
www.magnumprecisionmachines.com
Southeast
David Kennedy
Mazak Southeast Technology Center
1075 Northbrook Parkway
Suwanee, GA 30024
678-985-4800
Fax: 678-985-4801
TN
Don Roberts
Pinnacle Machine Tools, Inc.
855-D W. College Street
Murfreesboro, TN 37129
615-904-7786
Fax: 615-904-7783
AL
Jerry Edwards
Pinnacle Machine Tool Inc.
12036 Hwy 231/431 Suite C
Meridianville, AL 35759
256-828-2600
Fax: 256-828-8805
SC, NC, VA
Rick Smith
MachineTech, Inc.
8100-I Arrowridge Blvd.
Charlotte, NC 28273
704-665-6301
Fax: 704-665-6351
GA
Tim Kramer
Premier Engineering Co.
1635 Lakes Pkwy. Ste. U
Lawrenceville, GA 30043-5897
678-442-8382
Fax: 678-442-9363
MS
Richard Cahn
Dixie Mill Machine Tools Co.
901 Tchoupitoulass Street
New Orleans, LA 70152
504-525-6101
Fax: 504-525-3089
FL
John Grabenau
Premier Machinery Inc.
990 Sunshine Lane
Altamonte Springs, FL 32714
407-786-2000
Fax: 407-786-2001
Northeast
Steve Wilkins
Mazak Northeast Technology Center
700 Old County Cir.
Windsor Locks, CT 06096
860-292-4400
Fax: 860-654-0752
DE, E. PA, MD
Jim Rutan
Mazak Sales & Technical Center
1866 Colonial Village Ln. #110
Lancaster, PA 17601
717-392-7770
Fax: 717-392-1869
E. NY and NJ
Greg Kaufman
Mazak Sales & Technical Center
Valley Cottage, NY
845-267-2121
Fax: 845-267-2156
W. NY
Bill Miller
A.W. Miller Technical Sales
East Aurora, NY
716-652-8282
Fax: 716-655-4915
W. PA
Shane Kozloff
A.W. Miller Technical Sales
3 Tara Drive
PO Box 220
Harmony, PA 16037
724-453-1690
Fax: 724-453-1695
Midwest
Tim Fara
Mazak Midwest Technology Center
300 East Commerce Drive
Schaumburg, IL 60173
847-885-8311
Fax: 847-885-9565
ND, SD, MN
Joel Lundin
Tony Bailey
Northwest Machine Technologies, Inc.
13025 George Weber Dr, Ste 3
Rogers, MN 55374
763-493-3660
Fax: 763-493-3677
NE, West IA
Duane Ohlrich
Industrial Systems & Supply Inc.
2962 33rd Ave
PO Box 621
Columbus, NE 68601
402-564-4445
Fax: 402-563-4171
ohlrich@industrial-systems-supply.com
East IA
Bill Bettis
Mazak Midwest Technology Center
300 East Commerce Drive
Schaumburg, IL 60173
847-885-8311
Fax: 847-885-9565
MO, S. IL
Bill Summers
Municipal Tool & Machinery Co.
2465 Rock Island Blvd.
Maryland Heights, MO 63043
314-994-9905
Fax: 314-994-0410
KS
Paul Domurat
Concept Technical Sales, Inc.
6240 W. 135th St.
Overland Park, KS 66223
913-647-5366
Fax: 913-647-5355
WI
Mike Cekanor
Machinery Systems North
3280 Gateway Rd
Brookfield, WI 53045
262-781-4850
Fax: 262-781-6489
IL, N.W. IN
Ron Mager
Machinery Systems Inc.
614 East State Parkway
Schaumburg, IL 60173
847-882-8085
Fax: 847-882-2894
E. MI
Jim Addy
Addy Machinery Co.
36055 Groesbeck Highway
PO Box 159
Fraser, MI 48026
586-741-3000
Fax: 586-741-3015
W. MI
Peter Addy
Addy Machinery Co.
3757 Broadmoor Ave SE, Ste. A & B
Grand Rapids, MI 49512
800-AddyNOW
Fax: 616-975-9501
Greg Papke
Mazak Corp.
8025 Production Drive
Florence, KY 41042
859-342-1700
Fax: 859-342-1300
IN, KY
Jim Shelton
Shelton Machinery, Inc.
9900 North by Northeast Blvd.
Fisher, IN 46037
317-845-5588
Fax: 317-845-5925
S. OH
Ray Calvin
Mazak Southern Ohio Sales and Technical Center
2016 Springboro West
Dayton, OH 45439
937-853-0700
Fax: 936-853-0020
N. OH
Frank Gibbons
Numerequip
4810 Briar Road
Cleveland, OH 44135
216-265-0400
Fax: 216-265-0407