New Y-Axis ST-20SSY Turning Center from Haas Automation |
|
|
"The ability to turn and mill complex parts and perform multiple operations on one machine in a single setup increases throughput, reduces handling and improves accuracy," said a Haas spokesperson. "The new ST-20SSY from Haas Automation
is a high-speed turning center equipped with Y-axis, C-axis and
live-tooling to provide a 4-axis solution for secondary machining of
turned parts. |
 |
|
"The ST-20SSY has a maximum cutting capacity of 10 x 20.5 inches, with maximum swings of 31.75 inches over the front apron and 20.75 inches over the cross slide. It provides 4 inches of Y-axis travel (±2 inches from the centerline) for off-center milling, drilling and tapping and comes standard with high-torque live tooling and a servo-driven C-axis for 4-axis capability. The 24-station hybrid BOT/VDI turret indexes tools in 0.5 second for reduced cycle times."
Equipped with an A2-6 spindle nose, the ST-20SSY has a 3.5 inch spindle bore and a bar capacity of 2.0 inches; an 8.3 inch hydraulic 3-jaw chuck is standard. The machine's 30 HP vector dual-drive spindle spins to 5,000 RPM and provides 115 ft-lbs of torque at 1,380 RPM. On-the-fly wye-delta switching yields a wide constant-horsepower band for constant surface feed cuts. Rapids are 1,200 IPM on the Z-axis, 945 IPM on the X-axis and 710 IPM on the Y-axis.
Additional standard equipment on the ST-20SSY includes rigid tapping, spindle orientation, a 15 inch color LCD monitor and a USB port. Other available equipment includes a belt-type chip conveyor, programmable hydraulic tailstock, automatic tool probe, an automatic parts catcher, high-pressure coolant systems and more.
For more information contact:
Haas Automation, Inc.
2800 Sturgis Road
Oxnard, CA 93030
800-331-6746
Booth #S-8119
|
|